Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top blind corner hinge is built for inset doors on blind-corner cabinets, where the door must clear an adjacent cabinet as it swings open. It fits both frameless and face-frame construction, and the INSERTA mounting method presses the base plate into pre-drilled 5mm system holes without screws.
A blind-corner cabinet sits where two runs of cabinetry meet at a corner, and one door is partially hidden behind the adjacent cabinet face. The 95 degree opening angle is not a restriction; it is the geometry that lets the door swing open without catching on the neighboring cabinet. Attempting a wider-angle hinge in this position causes the door to collide with the adjacent run. The inset door sits flush within the opening, framed by a consistent gap all around, which makes precise fitting and reliable adjustment essential. The 35mm cup bores into the door back, and the arm clips to a base plate mounted on the cabinet side. That plate is sold separately and must be a Blum plate matched to your cabinet construction.
The hinge body is plated steel in a nickel finish. For the blind-corner position, the INSERTA mounting method earns its place: the plate presses into the cabinet's pre-drilled 5mm system holes and seats without screws, which keeps the install moving when you are hanging multiple doors through a run. The three-way adjustment range handles the tight tolerances an inset door demands, letting you bring the reveal square after the cabinet is set.
This hinge is the right call when a blind-corner cabinet needs inset doors on either a frameless or face-frame box. It suits cabinet shops building corner units in production, contractors fitting a corner run, and kitchen designers specifying hardware for flush-face cabinetry. INSERTA requires the cabinet to have pre-drilled 5mm system holes; on a box without them, use the screw-on plate version instead. For doors thicker than 22mm, a thick-door hinge is the correct choice. If the project calls for a cushioned, damped close rather than a spring pull, the BLUMOTION soft-close version of this hinge is the one to specify.
The 95 degree angle is intentional for blind-corner cabinets. A wider swing would drive the door into the adjacent cabinet. The reduced angle is what makes the hinge work in this position.
No. The hinge clips to a base plate that mounts separately on the cabinet side. Use a Blum plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.
A spring in the hinge pulls the door shut over the last few degrees once it is released near closed. It does not cushion or slow the close. For a damped, quiet close, the BLUMOTION version of this hinge is the alternative.
INSERTA is designed for cabinets with pre-drilled 5mm system holes following the 32mm grid. If your cabinet does not have those holes, use the screw-on plate version of this hinge instead.
Specify this hinge when a blind-corner cabinet calls for inset doors that clear the adjacent run, seat flush in their opening, and close on their own, with tool-free plate mounting that keeps the install on schedule.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP79T9580 Mfr# 79T9580 | Blum 95 ° CLIP top Inset Blind Corner Hinge Self-Closing Dowel Mount 79T9580 | ||||
Sold in: 1 Each |  BP79T9550 Mfr# 79T9550 | Blum 95 ° CLIP top Inset Blind Corner Hinge Self-Closing Screw-On 79T9550 |
