Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top blind corner hinge is built for inset doors on cabinets positioned at or near a wall corner, where the adjacent cabinet restricts how far the door can swing. It works on both face-frame and frameless boxes and includes a self-close spring that pulls the door shut automatically.
A blind corner cabinet sits tight to a wall or perpendicular cabinet run, and its door cannot swing past 90 degrees without hitting the adjacent surface. The 95 degree opening on this hinge is the correct engineering for that condition, not a compromise. It gives the door just enough clearance to open fully without collision. The inset geometry sets the door flush inside the opening, sitting behind the face frame or inside the box on a frameless build, with a small even reveal all around. The 35mm cup bores into the door, and the arm attaches to a Blum base plate mounted on the cabinet side, which is ordered separately.
The hinge is plated steel in a nickel finish, which coordinates with brushed metal hardware and holds up to daily use in a kitchen or bath environment. Screw-on mounting means the hinge fastens with wood screws rather than pressing into pre-drilled system holes, so it installs on any cabinet regardless of whether the box has 5mm system holes. The three-way adjustment built into the arm gives you side, height, and depth movement after mounting, which is what keeps inset doors sitting evenly in tight corner conditions where precise alignment matters most.
Specify this hinge when the corner cabinet carries an inset door and clearance to the adjacent wall or cabinet is limited. It suits cabinet shops building corner units for kitchens and baths, contractors hanging doors on existing corner boxes, and designers specifying hardware for inset face-frame or frameless cabinetry. Because inset doors sit inside the opening rather than over it, tolerances are tighter than overlay work, and the three-way adjustment range is what allows final tuning once the cabinet is set. For doors that overlay the cabinet side on a corner application, use the blind corner hinge in the overlay version instead.
The restricted opening is intentional. A corner cabinet positioned next to a wall or adjacent run does not have clearance for a standard 110 degree swing. The 95 degree angle lets the door open fully without hitting the neighboring surface.
Yes. This hinge clips to a Blum base plate that mounts to the cabinet side. The plate is sold separately. Use a Blum plate matched to your cabinet construction and door position. Plates from other brands will not connect to this hinge.
No. Self-close uses a spring to pull the door shut over the last few degrees. Soft-close uses a damper to slow the door so it settles quietly. This hinge is self-close: the spring draws the door shut but does not cushion the contact. If a damped, quiet close is needed, choose a BLUMOTION soft-close version.
Yes. Screw-on mounting uses standard wood screws and does not require pre-drilled system holes, so it works on any cabinet construction.
This hinge solves the blind corner clearance problem for inset doors: it limits the swing to what the space allows, pulls the door shut automatically, and gives you the adjustment range to keep a tight inset reveal looking right.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP79T9590B Mfr# 79T9590B | Blum CLIP Top 95° Inset Blind Corner Hinge Self-Closing Inserta 79T9590B | ||||
Sold in: 1 Each |  BP79T9580 Mfr# 79T9580 | Blum 95 ° CLIP top Inset Blind Corner Hinge Self-Closing Dowel Mount 79T9580 |
