Berenson Echo Oil Rubbed Bronze 1-3/16" (30 mm) Diameter Knob, 9227-1ORB-P

Berenson Echo Oil Rubbed Bronze Knob Details

Berenson Echo oil rubbed bronze knob gives you a 1-3/16 inch diameter pull point that works well on doors or drawers where a compact grip is needed. The Echo Series design identifies it as part of a coordinated Berenson decorative hardware family, which helps maintain a consistent look across a run of cabinets. The knob is made from zinc, which provides a solid-feeling handle while allowing a detailed profile in a smaller size. Its round shape at 1-3/16 inch width offers a familiar hand contact area that suits everyday cabinet use. The oil rubbed bronze finish defines the color tone and surface appearance, supporting projects that call for darker, traditional hardware. A 5/8 inch base diameter allows a defined footprint on the cabinet face, which helps visually frame the knob on face frames or slab fronts. The 1 inch projection sets how far the knob stands off the door or drawer for fingertip clearance.

Key Echo Series Knob Points For Projects

• The 1-3/16 inch (30 mm) diameter length or width creates a small-format knob that fits comfortably on narrower rails, which helps when laying out hardware on compact cabinet fronts.
• The 5/8 inch base diameter concentrates contact at the mounting point so the knob seats within a controlled footprint, which matters when aligning it with reveals and stile widths.
• The 1 inch projection defines the stand-off from the cabinet face, giving fingers space to pull while keeping the knob closer to the door plane for a tighter, streamlined profile.
• The oil rubbed bronze finish sets a darker, aged look that pairs with face frames, painted fronts, or stained wood where a warm, low-sheen metal tone is preferred.
• The zinc construction establishes the knob as a metal component, which supports a solid feel at the touch point and suits typical interior cabinet and furniture environments.
• The Berenson Corporation Echo Series designation connects this knob to other Echo collection pieces, which helps when matching hardware across multiple doors and drawers.

Installation Dimensions And Grip Clearance

The Echo 1-3-16 inch cabinet knob uses a 1-3/16 inch diameter head, so layout drilling can be planned around that size when positioning knobs near edges or profiles. An 8-32 thread interface with a 1 inch screw length is specified, which tells you the thread standard and typical reach through standard cabinet door or drawer front thicknesses. The 1 inch projection from the mounting surface establishes the hand clearance from the cabinet face, giving a predictable stand-off when used on both doors and drawers. With a 5/8 inch base diameter contacting the surface, the knob presents a defined ring at the mounting point, which helps when centering it on narrow rails or stile locations. The 1-3/16 inch width measurement also matches the listed diameter, keeping the overall knob profile consistent for layout grids.

Using This Echo Knob On Cabinet Runs

Where The Echo Series Cabinet Knob Fits

This Berenson Echo 9227-1ORB-P knob is identified as part of the decorative hardware and moldings category under knobs, so it is positioned for cabinet and furniture door or drawer use. The 1-3/16 inch diameter head suits standard cabinet fronts where a modest-sized knob is preferred rather than an oversized pull. Its 1 inch projection keeps the grip close to the face, which works well on kitchen, bath, or built-in cabinetry where front clearance may be limited by adjacent doors or walls. The oil rubbed bronze finish places it in darker design schemes, matching projects that call for warm, bronze-toned decorative hardware rather than brighter metals. With a zinc body and defined 5/8 inch base diameter, the knob provides a focused contact area on wood or similar substrates, making it a practical choice for typical indoor cabinet installations.

Why Echo Dimensions Support Consistent Results

The Echo series cabinet hardware uses a clearly stated 1-3/16 inch diameter, which helps installers repeat hole placement and visual spacing across a bank of doors without guessing knob footprint. The 1 inch projection value lets you keep a uniform stand-off distance, so doors and drawers line up with a consistent pull depth. Using the 5/8 inch base diameter as a reference point allows straightforward centering on rails and stiles, improving symmetry when spacing knobs on pairs of doors. The specified 8-32 screw size with 1 inch length defines the fastening standard, making it easier to coordinate drilling diameter and thread engagement in common cabinet materials. The combination of zinc material and oil rubbed bronze finish provides a predictable weight and surface feel, which supports a uniform experience when the same knob is repeated throughout a room. Being part of the Echo Series also helps keep design alignment when mixing this knob with other Echo collection pieces on nearby cabinets.

Common Berenson Echo Cabinet Knob Questions

Selecting This Echo Knob For Your Project

The Berenson Echo oil rubbed bronze knob pairs a 1-3/16 inch diameter head with a 1 inch projection, giving a compact, repeatable pull point for cabinets. With zinc construction, an oil rubbed bronze finish, and a defined 5/8 inch base, it suits projects that call for dark, coordinated decorative hardware. The specified 8-32 by 1 inch screw standard supports straightforward fastening into typical cabinet fronts. For runs where Echo Series styling and consistent dimensions matter, this knob provides a clear, measured option to carry across doors and drawers.