Berenson Echo Matte Black 1-3/16" (30 mm) Diameter Knob, 9262-1055-P

Berenson Echo Series Knob For Cabinet Projects

Berenson Echo series knob gives cabinets a 1-3/16 inch diameter pull point in a compact round profile, so doors and drawers get a defined grip area without taking much front space. The matte black finish keeps reflections down and creates a consistent dark tone across hardware runs, which helps maintain a unified look on banks of cabinets. Zinc construction forms a solid body for the knob, so the hand-feel stays substantial on repeated use in busy kitchens or shop-built installations. The 5/8 inch base diameter steps the knob down cleanly to the door or drawer face, which helps visually contain wear around the fastener area. A 1-3/16 inch projection brings the knob far enough off the surface for finger clearance while staying tight enough to the front to avoid snagging during everyday work around the cabinets.

Key Echo Knob Details That Support Jobs

• The 1-3/16 inch diameter head defines a clear pull area, which helps users grab consistently on doors and drawers in both residential and shop environments.
• The 1-3/16 inch projection spaces the grip off the face, which creates working room for fingers while keeping the knob close enough to avoid catching clothing in tight corridors.
• The 5/8 inch base diameter transitions the knob to the cabinet face, which helps visually center the load on the front and can reduce visible wear around the mounting point over time.
• The matte black finish provides a uniform dark surface, which supports modern and contrast-focused layouts when set against lighter cabinet finishes.
• The zinc material forms a single-piece body, which gives the knob a solid feel during repeated pulls on frequently used cabinet doors and drawers.
• The 8-32 x 1 inch screw size matches the tapped mount in the knob, which simplifies selection of a matching machine screw length for various front thicknesses.

Installation Details For Echo Series Cabinet Knob

This Echo series knob uses an 8-32 x 1 inch machine screw connection, so it tightens down through the cabinet front into the threaded body of the knob for a secure mount. The 5/8 inch base diameter gives a defined seating area against the door or drawer front, which helps the knob sit square when the screw is tightened. With a 1-3/16 inch diameter and matching 1-3/16 inch projection, the knob keeps the grip centered over the mounting hole, which supports accurate layout using standard drilling jigs. The matte black finish covers the visible surfaces of the zinc knob, so layout marks near the mount can be placed to coordinate with other dark hardware elements on the same run of cabinets.

Using The Berenson Echo Knob In Real Projects

Where This Matte Black Echo Knob Works Well

The Berenson Echo series knob in matte black fits cabinet applications where a compact round pull is preferred over longer handles, because its 1-3/16 inch diameter concentrates the grip in a small footprint. The 1-3/16 inch projection places the knob out from the cabinet face enough for a full finger wrap, which suits doors and drawers on base, wall, or utility cabinets that see steady use. The matte black finish pairs readily with lighter painted or laminate fronts, creating a defined contrast point that can help orient users to door and drawer locations. On darker fronts, the same finish supports a more subdued, low-reflection look, which suits workspaces where glare control is important. The Echo collection identity groups this knob with other Echo pieces, helping maintain a consistent design language when multiple hardware types from the same collection are used in one project.

Details That Support Repeatable Knob Layout And Fit

The 1-3/16 inch diameter of this Berenson Echo series knob keeps the center of the grip directly over the mounting hole, which simplifies layout using standard center-point drilling methods on cabinet doors and drawer fronts. A matching 1-3/16 inch projection keeps the hand away from the surface during pulls, which can reduce finger contact with finished fronts and help maintain surface appearance during regular use. The 5/8 inch base diameter creates a smaller contact ring at the cabinet face, giving a clear visual reference for alignment against rail or stile edges during installation. The 8-32 x 1 inch screw size defines the thread standard at the connection, which streamlines planning for hole sizing and screw length selection across doors and drawers of different thicknesses. Zinc construction provides a single solid knob body, so once tightened through the base, the hardware remains stable under repeated opening and closing cycles on active cabinets.

Common Questions About The Berenson Echo Knob

Select This Echo Knob For Defined Matte Black Pulls

The Berenson Echo series knob in matte black combines a 1-3/16 inch diameter head, 1-3/16 inch projection, and 5/8 inch base into a compact pull that suits busy cabinet runs. With zinc construction and an 8-32 x 1 inch screw connection, it sets a clear standard for layout, mounting, and repeat use across doors and drawers in the same project.