Berenson Echo Polished Nickel 1-3/16" (30 mm) Diameter Knob, 9259-1014-P

Berenson Echo Knob For Cabinet And Drawer Use

Berenson Echo knob in polished nickel gives you a 1-3/16 inch diameter pull point made for cabinets and furniture, so doors and drawers have a consistent hand feel and a defined center for opening and closing.

The Echo Series design from Berenson Corporation uses a round 1-3/16 inch diameter face, which spreads pulling force across more surface area and helps reduce pressure points on your fingers during repeated use in busy spaces.

A base diameter of 5/8 inch creates a stable footprint against the cabinet surface, which helps distribute load and support the knob on typical wood or composite door and drawer fronts.

The 1-3/16 inch projection gives clearance between fingers and the cabinet face, supporting a full three-finger grip while helping keep hands away from the surface during operation.

Construction in zinc provides a solid metal core for the knob body, which supports everyday residential cabinet use where a metal pull is preferred over a lighter material.

The polished nickel finish delivers a bright metallic look on the zinc base, which visually ties in with other polished nickel decorative hardware and helps maintain a unified finish theme across a project.

Echo Series Details That Support Daily Use

• The 1-3/16 inch diameter top gives a generous contact area, which helps users get a firm grip and can make small doors or drawers easier to operate in compact kitchens or work areas.
• The 5/8 inch base diameter keeps the bearing surface relatively small, which helps the knob sit cleanly on standard cabinet rail and stile widths without crowding neighboring profiles or edges.
• The 1-3/16 inch projection spaces the hand away from the cabinet face, which assists users wearing gloves or with larger hands by providing extra finger room behind the knob.
• The polished nickel finish on the Echo Series blends with polished nickel hinges and other trim, which helps designers and installers follow a coherent hardware finish schedule across a run of cabinets.
• The zinc material gives the knob a metal weight and feel, which many installers and clients prefer on frequently used cabinet doors because it matches the expectation of solid decorative hardware.
• The Berenson Corporation Echo Series identity ties this knob to a known decorative hardware family, which helps match existing Echo pulls or other knobs on retrofit or expansion projects.

Mounting Dimensions For Accurate Knob Placement

This Echo Series knob uses an 8-32 screw thread, which aligns with a standard cabinet knob mounting pattern and lets installers use common 8-32 machine screws through a 3/16 inch pilot hole in the door or drawer front.

The 1-3/16 inch diameter and 1-3/16 inch projection work together to define the stand-off distance from the cabinet face, which helps layout personnel plan knob placement relative to edges, neighboring doors, and trim pieces.

The 5/8 inch base diameter concentrates contact close to the mounting hole area, which helps the knob seat firmly when tightened against typical door or drawer material thicknesses used in cabinetry.

The round planform of the 1-3/16 inch width means orientation is not critical at installation, which can speed up repetitive knob mounting along long cabinet runs while maintaining a consistent appearance.

Using The Echo Polished Nickel Knob In Projects

Where The Echo Knob Works Best

The Berenson Echo knob is part of the Echo Series cabinet hardware, which positions it as a match for cabinet and furniture doors and drawers where a round 1-3/16 inch diameter pull is desired for a uniform look.

The polished nickel finish makes this knob well suited to projects that already specify polished nickel decorative hardware, so designers can pair it with polished nickel hinges or pulls to continue the same bright metallic tone.

The 1-3/16 inch diameter allows this knob to scale well on standard kitchen and bath cabinet doors, because the size is large enough to handle easily without visually overwhelming a typical door stile or drawer front.

The 1-3/16 inch projection positions the gripping surface out from the cabinet face, which helps on thicker door profiles by preserving finger clearance even when doors have profiled edges or applied molding details.

The zinc construction works in typical interior cabinet environments, where a solid metal knob provides a familiar feel each time a cabinet or drawer is opened in kitchens, laundry rooms, offices, or built-in furniture.

Details That Support Repeatable Cabinet Results

The Echo Series 1-3/16 inch diameter gives installers a fixed reference for jig setup, which supports consistent drilling patterns when repeating the same knob across multiple doors and drawers on a job.

The 5/8 inch base diameter defines the amount of flat surface needed around the mounting hole, which helps layout planning on narrow rails where there is limited land between the edge and the knob centerline.

The 1-3/16 inch projection from the cabinet face sets a repeatable offset, so installers can predict how far the knob will extend into walkways or reach zones when laying out cabinets near corners and adjacent appliances.

The 8-32 screw size aligns with many cabinet shop standards, which allows shops to use familiar drilling and tapping routines and can simplify on-site adjustments when swapping or repositioning knobs.

The polished nickel finish on the Echo Series provides a consistent surface color, which matters when several knobs are mounted in a line and installers want the hardware to visually read as one coordinated system.

The Berenson Corporation Echo Series designation ties this knob to a specific manufacturer line, which helps future maintenance or expansion work by giving a clear reference when matching existing knobs in the same style.

Common Questions About The Berenson Echo Knob

Select This Echo Knob For Polished Nickel Projects

The Berenson Echo knob in polished nickel combines a 1-3/16 inch diameter face, 1-3/16 inch projection, and 5/8 inch base on a zinc body, giving cabinet projects a defined, repeatable pull point that aligns with standard 8-32 screw mounting.