Echo Brushed Nickel Cabinet Knob For Cabinets

Echo brushed nickel cabinet knob is a Berenson Echo Series knob designed for use where a compact, round pull point is needed on cabinet fronts. The knob has a 1-3/16 inch (30 mm) diameter head that provides a defined gripping surface for opening and closing doors or drawers with a single hand motion. Its brushed nickel finish gives the zinc body a muted metal look that helps it visually blend with other brushed nickel decorative hardware in a project. The knob projects 1 inch from the mounting surface, which creates finger clearance while keeping the pull close to the cabinet face in tighter layouts. A 5/8 inch base diameter steps the knob down to the door or drawer surface, helping concentrate the bearing surface where the knob contacts the wood or panel material.

Key Echo Brushed Nickel Knob Details

• The Berenson Echo Series design defines this knob as part of a coordinated decorative hardware collection, which helps maintain a consistent look when using matching parts on multiple cabinets in the same space.
• A 1-3/16 inch (30 mm) diameter head gives enough surface for fingers to grab the knob firmly, which supports repeated daily use on doors and drawers without needing a large footprint on the face.
• The brushed nickel finish on the zinc knob provides a soft metallic appearance, which works in projects that use other brushed nickel components where glare reduction and uniform color tone are important.
• A 1 inch projection sets the working distance from the cabinet face, which creates clearance for fingers while keeping the knob from extending too far into walkways or tight working areas.
• The 5/8 inch base diameter creates a defined transition between the knob and the mounting surface, which helps seat the knob neatly against the door or drawer front during installation.
• The zinc material construction forms the body of the knob, which provides a solid-feeling pull point suitable for typical cabinet and drawer applications in woodworking projects.

Echo Knob Fit, Dimensions, And Mounting

The Echo knob uses a threaded connection sized for an 8-32 screw, which matches the listed screw size and gives a familiar mounting interface for cabinet and drawer fronts that accept this standard thread. The 1-3/16 inch head diameter and 1 inch projection work together so the knob occupies a compact footprint while still allowing straight-pull or angled-grab operation in front of face frames or panel doors. With a 5/8 inch base diameter, the load from pulling is centered close to the screw location, which supports stable seating of the knob against flat cabinet faces. The combination of 30 mm diameter and 1 inch projection suits layouts where hardware spacing, door overlays, and drawer heights depend on tight dimensional control.

Using The Berenson Echo Knob In Projects

Where The Echo Brushed Nickel Knob Works

The Berenson Echo Series brushed nickel 1-3/16 inch diameter knob is suited to cabinet and drawer fronts that call for a round pull in the decorative hardware and moldings category. Its 1-3/16 inch width allows placement on doors and drawers where stile or rail dimensions limit available face space, such as narrow cabinet frames, while still giving a centered handhold. The 1 inch projection helps in installations on face-frame and frameless cabinets because it creates depth for fingers over common door thicknesses and drawer front builds. The brushed nickel finish supports projects built around similar finishes on hinges, pulls, and other decorative components, keeping a unified visual line across a kitchen, bath, or shop cabinet run. With a zinc body, the knob serves as a practical pull point on frequently used cabinet access points in woodworking environments supplied by Wurth Baer Supply.

Details That Support Consistent Echo Knob Results

The 8-32 screw size specification on this Echo knob ties the part directly to a standard cabinet fastener thread, which helps installers match the knob to drilled and tapped locations that expect this thread pattern. A 1-3/16 inch (30 mm) diameter gives a predictable measurement when laying out knob centerlines on multiple doors and drawers, keeping hardware alignment consistent across banks of cabinets. The 1 inch projection figure provides a fixed distance from the mounting surface, which aids in planning door swing clearances and drawer front offsets where hardware depth may intersect nearby obstacles. The 5/8 inch base diameter defines the footprint that bears against the wood, which is useful when deciding backing thickness and material around the mounting hole. By specifying zinc as the material and brushed nickel as the finish, the knob supplies known surface and body characteristics that can be matched on replacement or expansion work in existing Berenson Echo installations.

Common Questions About The Echo Series Knob

Select The Echo Brushed Nickel Knob For Your Job

The Berenson Echo Series brushed nickel 1-3/16 inch diameter knob brings a defined set of dimensions and a known 8-32 mounting interface to cabinet and drawer projects. Its 1 inch projection, 5/8 inch base, and zinc construction give installers predictable hardware geometry when laying out pulls across new or existing cabinetry. With the brushed nickel finish matched to the Echo collection, this knob fits projects that call for consistent decorative hardware sourced through Wurth Baer Supply. Use this Echo knob where a compact, round pull with standard-thread mounting supports clean lines and repeatable results on cabinet fronts.