Berenson Echo Pull 3" (76 mm) Center to Center, Brushed Nickel, 9222-1BPN-P

Berenson Echo Brushed Nickel Pull For Cabinets

Berenson Echo brushed nickel pull is a zinc cabinet handle designed for jobs calling for a 3 inch center to center drilling. This pull uses a 3 inch center to center layout, which lets it line up with many standard 3 inch boring patterns on cabinet doors and drawers. The pull has a total length of 4-3/4 inches, giving a bit of hand clearance beyond the mounting holes for everyday gripping. A projection of 1-1/8 inches spaces the hand away from the door face, helping fingers clear the surface during use. The 3/4 inch width provides a stable gripping surface, which supports consistent pulls on heavier drawers. A brushed nickel finish gives a muted metallic look that works well where a softer sheen is preferred. The pull is made from zinc, which provides a solid feel for cabinet and drawer applications.

Key Echo Series Pull Details For Projects

• The 3 inch center to center dimension sets consistent hole spacing, which helps when aligning multiple doors or drawers in a run using the same boring pattern.
• The 4-3/4 inch overall length provides extra bar on each side of the screw locations, which helps users grab the pull comfortably from different angles.
• The 1-1/8 inch projection stands the pull off the surface, which creates finger room between the pull and the door or drawer face during operation.
• The 3/4 inch width creates a wider contact surface, which supports steady pulling force on cabinets and drawers that see frequent use.
• The brushed nickel finish offers a smooth, low-glare appearance, which suits projects targeting a contemporary but not highly reflective hardware look.
• The zinc material gives the pull a substantial construction, which supports its role in everyday cabinet and drawer opening tasks.
• The Echo collection identity groups this pull with other Echo pieces, which matters when projects aim for consistent hardware style across a space.

Mounting Dimensions For Berenson Echo Pull

This Berenson Echo Series pull uses a 3 inch center to center mounting, so the screw holes are spaced 3 inches apart on the cabinet or drawer face. The 1 inch base diameter at each end identifies the footprint on the surface, which guides boring layout and edge clearance decisions. With a 1-1/8 inch projection, the pull stands off far enough to clear fingers without extending excessively into walkways. The 4-3/4 inch overall length helps installers visualize coverage across rail or drawer front widths. The 3/4 inch width defines how much hardware visually shows on the face, important when matching other hardware sizes within the same project.

Using This Echo Series Pull In Real Projects

Where The Echo Series 3 Inch Pull Fits Best

The Echo Series 3 inch cabinet pull works in decorative hardware applications where a 3 inch center to center layout is required. Its role as a handle and pull in the Decorative Hardware & Moldings category suits cabinets and drawers in wood shops, residential builds, or commercial millwork that specify Berenson hardware. The 4-3/4 inch length gives proportion on standard cabinet doors, helping the pull look balanced on common rail heights. A 1 inch base diameter at each end defines a clean contact circle on the door or drawer face, which pairs well with flat or slightly profiled fronts. The brushed nickel finish supports projects targeting a consistent brushed nickel hardware theme across kitchens, baths, or built-ins. As part of the Echo collection, this pull can be used wherever a coordinated Echo look is desired on multiple cabinet runs.

Details That Support Repeatable Cabinet Installations

The 3 inch center to center measurement on this Berenson 9222-1BPN-P pull allows repeatable drilling using standard 3 inch jigs, which helps keep lines straight across banks of doors and drawers. A projection of 1-1/8 inches maintains predictable stand-off from the surface, which aids in planning clearances so hardware does not feel cramped against raised panels or edge details. The 3/4 inch width means each pull presents a consistent grip size, supporting uniform user feel across every opening point on the job. The 1 inch base diameter creates a defined bearing surface against the cabinet face, which helps pulls sit neatly when installed on flat surfaces. Zinc construction keeps the pull weight and feel consistent from piece to piece, supporting uniform operation across the installation. The brushed nickel finish gives each pull a matching tone, which helps long cabinet runs read as a single, coordinated hardware line.

Common Questions About Echo Brushed Nickel Pulls

Selecting This Echo Pull For Your Next Job

The Berenson Echo brushed nickel pull with 3 inch center to center drilling offers defined dimensions that support precise cabinet layouts. Its 4-3/4 inch length, 1-1/8 inch projection, and 3/4 inch width create a consistent user grip across doors and drawers. Zinc construction and a brushed nickel finish align with common decorative hardware choices. For projects calling for Echo collection styling and 3 inch boring, this 9222-1BPN-P pull delivers a clearly specified option ready for use on cabinet and drawer fronts.