Bainbridge 1-3/8" Closed Round Flange, White, 1324WH-42 WHOLE

1-3/8 Inch Plastic Flange For Closet Rods

1-3/8 inch plastic flange from Bainbridge Manufacturing provides a mounting point for a 1-3/8 inch diameter rod, so closet or shelf rods have a defined support location on each side. The flange is part of the Bainbridge Manufacturing line, giving installers a clearly identified 1324WH-42 WHOLE part to repeat across multiple jobs. The white plastic construction presents a neutral appearance around the rod connection, which helps the rod blend into typical white closet or storage interiors. This flange is classified under closet rods and flanges, so it is intended to work as the rod termination at each end of a run. By using a purpose-built flange sized for a 1-3/8 inch rod, the installer sets a consistent bearing surface for the rod, which supports straightforward layout and drilling on closet projects.

Practical Details Of This Closet Flange Set

• The 1-3/8 inch plastic flange is sized for a 1-3/8 inch diameter rod, so the rod seats into a matched opening that stabilizes the rod end during everyday use.
• Two types of flange sets are available, one without pins and one with two 5 mm bore and 32 mm system pins, so installers can choose between a simple surface mount or a pinned layout that ties into 32 mm system drilling.
• The white color described in the SAP detail provides a light finish at the rod support point, which helps coordinate with white closet components and keeps the hardware visually low profile.
• The product is sold in both broken and full box and bulk pack quantities, so shops can order smaller quantities for a single build or larger runs for repeated closet installations.

Mounting And Pin Layout For Closet Installation

The flange option with two 5 mm bore and 32 mm system pins uses 5 mm pins on a 32 mm system layout, so it engages directly with 32 mm system holes in closet panels for faster alignment. The alternative flange set without pins relies on a flat mounting face, so it works where panels do not have 32 mm system drilling and the installer prefers a non-pinned attachment method. The SAP description notes 5 mm pegs, which ties the pinned version of the flange to commonly used 5 mm system holes and supports repeatable positioning across cabinet sides or partitions. By matching the rod diameter and the pin spacing to known dimensions, this flange supports predictable drilling and mounting in shop-built or modular closet systems.

Using This Flange Set In Closet Projects

Where These Plastic Flanges Are Applied

This product sits in the shelf, closet and garage organization category under closet tubing and flanges, so it is designed for use around closet or similar storage rods rather than general framing work. As a closet rods and flanges class part, the 1-3/8 inch plastic flange works at the ends of a 1-3/8 inch rod, supporting installations such as wardrobe hanging spaces, utility closets, or storage runs that use that rod size. One open flange and one closed flange are described in the web text, so one side allows the rod to drop in while the other side captures the rod end, which supports both initial placement and retention of the rod. This open and closed arrangement helps when assembling longer closet sections, because the rod can be inserted from the open side and then carried across to seat into the closed side.

Why These Flange Details Support Consistent Results

The 1-3/8 inch diameter sizing means that every matching rod end bears on a consistent plastic surface, which helps distribute hanging loads along the flange rather than at a random contact point. The option for a flange set with two 5 mm bore and 32 mm system pins lets installers align the rod support to existing 32 mm rows, which reduces layout steps when panels already follow that drilling standard. The SAP reference to 5 mm pegs reinforces that this pinned version is meant to match standard 5 mm system holes, so the pins act as alignment references as well as support. Choosing between pinned and no-pin flange sets allows a shop to standardize on a method that matches their drilling approach, which can streamline both initial assembly and future repeat jobs using the same Bainbridge 1324WH-42 WHOLE specification.

Buyer Questions On 1-3/8 Inch Plastic Flange Use

Selecting This Flange For Closet Rod Projects

The 1-3/8 inch plastic flange with Bainbridge Manufacturing part 1324WH-42 WHOLE gives closet and storage builders a clearly defined support for a 1-3/8 inch rod, with a choice between pinned and non-pinned sets. The availability of two 5 mm bore and 32 mm system pins on one option ties directly into 32 mm system drilling, which helps align rod supports with panel hole rows. The white plastic flange finish presents a neutral appearance at the rod ends, fitting typical closet interiors. For projects built around 1-3/8 inch diameter rods, this closet rods and flanges class part offers a repeatable way to terminate each run.