1-3/8 plastic flange Bainbridge 1323WH-42 WHOLE

1-3/8 Plastic Flange For Closet Rod Support

1-3/8 plastic flange from Bainbridge Manufacturing is a plastic flange designed to support 1-3/8 inch diameter closet rods in closet, shelf, and garage organization runs. The flange belongs to the closet rods and flanges product class, so it is built for typical hanging rod layouts rather than general hardware use. Two types of flange sets are available, with one option using a set without pins, which suits straightforward screw-mounted installations where system pins are not required. Another option uses a set with two 5 mm bore and 32 mm system pins, which lets installers align flanges with a 32 mm system layout on cabinet or closet panels. The flanges are plastic and white, giving a consistent light finish that visually matches many white closet components. The manufacturer part number 1323WH-42 WHOLE identifies this specific white, 1-3/8 inch diameter closed flange configuration for repeat ordering.

Closet Flange Details That Support Daily Use

• The 1-3/8 inch diameter design fits closet rods of the same diameter, so rods seat properly and carry hanging loads along the intended bearing surface rather than shifting against the wall.
• The plastic flange construction delivers a uniform molded shape, which helps the rod sit square in the opening so hangers glide more predictably along the rod span.
• The white color finish ties in with typical white closet parts, so the flange visually blends into shelving or panels instead of drawing attention at each end of the rod.
• Two types of flange sets are available, giving the choice between a set without pins or a set with two 5 mm bore and 32 mm system pins so installers can match different panel drilling patterns.
• The presence of two 5 mm bore and 32 mm system pins on one flange set aligns with standard 32 mm system holes, which helps position the rod flanges consistently across multiple cabinets or sections.

Installation Options For Rod Mounting Layouts

The Bainbridge Manufacturing 1-3/8 plastic flange is designed around a 1-3/8 inch diameter rod, so the installer sizes the tube to that dimension for a solid fit in both open and closed flanges. A set without pins works well where flanges are fastened directly to a flat surface, giving flexibility to place the rod wherever layout demands. The alternative option with two 5 mm bore and 32 mm system pins suits installations that follow a 32 mm system pattern, because the pins register directly into the system holes. This pin-based location helps keep both flanges level with one another, which is important for smooth rod function and consistent hanger clearance.

How These Bainbridge Flanges Fit Closet Projects

Using Open And Closed Flanges In Closets

The 1-3/8 inch diameter round plastic flanges are intended for closet, shelf, and garage organization setups that rely on a continuous hanging rod. The web description notes that packing consists of one open flange and one closed flange set, so one end can capture the rod fully while the other end provides an open-style support. This open and closed pairing lets the installer decide which side of the run benefits from a drop-in end versus a fully captured end, such as placing the open flange at a serviceable side of a closet. The product sits in the closet rods and flanges category, so it is naturally suited to typical wardrobe sections, reach-in closets, or storage bays where a 1-3/8 inch tube is standard.

Why Pins, Diameter, And Color Affect Results

The option for a flange set with two 5 mm bore and 32 mm system pins directly supports work on cabinet-style closet systems that follow the 32 mm drilling standard, because the pins key into those holes and limit misalignment. When both sides of the rod use components aligned to that 32 mm system, the resulting rod height repeats from section to section, which is helpful in multi-bay projects. The alternative set without pins focuses on projects where custom spacing or non-system walls dictate flange placement, letting the installer position the 1-3/8 inch rod purely by field layout. The white plastic material helps these flanges follow the visual line of white shelving or panels, so the hardware does its job without standing out at the ends of the rod. The manufacturer part number 1323WH-42 WHOLE ties these characteristics together under one identifier, which simplifies reordering for repeat closet jobs using the same diameter and color.

Common Questions About This Closet Flange

Choose This Flange For 1-3/8 Inch Closet Rods

The Bainbridge Manufacturing 1-3/8 plastic flange offers a straightforward way to support 1-3/8 inch diameter closet rods in closet, shelf, and garage organization work. With options for a set without pins or a set using two 5 mm bore and 32 mm system pins, it adapts to both traditional mounting surfaces and 32 mm system panel layouts. The white plastic finish and open and closed flange pairing suit typical closet interiors where a consistent appearance is important. Wurth Baer Supply provides this 1323WH-42 WHOLE part in broken, full box, and bulk pack quantities, so it can be ordered to match project size and standardized across repeat installations.