Bainbridge 1-3/8" Open Round Flange, White, 1323WH-42 HALF

1-3/8 Inch Plastic Flange For Closet Tubing

1-3/8" plastic flange describes a round plastic flange sized for 1-3/8 inch closet tubing, so it supports standard closet rod installations where that diameter is already specified. The Bainbridge Manufacturing 1323WH-42 HALF part number identifies this specific white flange, helping match it to existing layouts or repeat work across multiple jobs. The product is classified under Closet Rods & Flanges in Shelf, Closet & Garage Organization, so it is intended for closet rod support rather than general hardware use. The SAP description notes an open flange in white with no pegs, which means it positions the rod at the wall without relying on system pins. The web description explains that two types of flange sets are available, with or without 5 mm bore and 32 mm system pins, so this variant suits projects that do not use those pinned layouts.

Closet Flange Details That Support Rod Work

• The 1-3/8" plastic flange size matches 1-3/8 inch closet tubing, so the flange centers and supports the rod at the wall where this diameter is part of the closet design.
• Being a round plastic flange from Bainbridge Manufacturing provides a consistent molded interface around the rod, which helps distribute contact on the tubing end during regular hanging use.
• The white finish described in the SAP detail gives a neutral appearance at the rod ends, which blends with typical white closet interiors and supports a uniform project look.
• The flange is part of the Closet Rods & Flanges product class, aligning it with other closet organization hardware so it fits established closet tubing layouts on similar jobs.
• The product is offered as sets and bulk packs, which supports purchasing for either single installations or repeated closet rod runs on larger projects.

Mounting Approach For Open Flange Without Pegs

The SAP description calling out an open flange in white with no pegs indicates this flange locates the 1-3/8 inch rod without engaging any 5 mm system pins, which suits walls that are not drilled on a 32 mm system. The web description notes that another flange type uses two 5 mm bore and 32 mm system pins, so this variant is aimed at installations where that pinned system is not part of the closet layout. The round plastic construction around the 1-3/8 inch opening supports the rod along its circumference, which helps the rod sit in a predictable position relative to the wall face. That predictable seating supports alignment from one closet to the next when using the same Bainbridge 1323WH-42 HALF part.

How This Bainbridge Flange Works In Closets

Using The Flange With 1-3/8 Inch Closet Tubing

The 1-3/8" plastic flange designation ties directly to 1-3/8 inch closet tubing, so it is used where that rod diameter is specified in the closet plan. As a round plastic flange, it forms a shaped opening that receives the tubing, helping to hold the rod at a consistent height across the span. The classification under Closet Tubing & Flanges signals that it works as a termination and support point for closet rods rather than as free-standing hardware. The Bainbridge Manufacturing part number 1323WH-42 HALF allows installers to call out the same exact flange on drawings or material lists, which supports consistent hardware selection across multiple closets in the same project. Because this variant is the open flange described as white with no pegs, it works in layouts where the closet sides are solid and no 32 mm system holes are used to position the rod.

Details That Support Repeatable Rod Alignment

The description of two types of flange sets - one without pins and one with two 5 mm bore and 32 mm system pins - shows that this 1323WH-42 HALF version belongs to the non-pinned group, so it does not rely on pre-drilled 32 mm holes for alignment. That matters when closet walls are built or finished without a system pattern, because the flange can still position the 1-3/8 inch rod where the layout calls for it. The web description ties the flange directly to closet tubing and flanges as a category, which reinforces that its geometry is designed around standard closet rod applications. The white color referenced in the SAP description supports visual alignment as well, because matching white flanges at both ends signal when rods are centered and set to the same relative position from one closet opening to the next.

Common Questions About This Closet Flange

Select This Flange For 1-3/8 Inch Rod Projects

The 1-3/8" plastic flange from Bainbridge Manufacturing is tailored to 1-3/8 inch closet tubing, so it aligns with standard closet rod dimensions on many jobs. The white, open, no-pegs configuration described for part 1323WH-42 HALF fits wall conditions that are not drilled on a 32 mm pattern, while still supporting organized closet layouts. With availability in pair sets and bulk packs, it can be planned for single installations or repeated use across multiple closets. For projects built around 1-3/8 inch closet rods, this flange offers a defined, product-classed solution for locating rods at the wall.