Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1-3/8 inch plastic flange describes a Bainbridge Manufacturing 1323AL-42 HALF part designed around a 1-3/8 inch diameter rod, so installers can match it directly to standard closet tubing in that size. The flange is part of Bainbridge Manufacturing plastic flanges, which gives a consistent material family when you are laying out multiple closet sections. The product is classified under Closet Rods & Flanges, tying it specifically to rod support work rather than general hardware. The 1323AL-42 HALF part number identifies this exact configuration, helping you align it with plans, bids, or past jobs that call out this specification. Being a plastic flange lets you plan for a non-metal contact surface at the rod ends, which matters where quieter movement or softer bearing on the rod is desired.
The 1-3/8 inch diameter focus means this flange matches that rod size without adaptation, so fit-up is straightforward once the closet tubing is cut. The SAP description 1-3/8' DIA OPEN FLNG, ALM, NO PEGS indicates this variant is the open flange style with no pegs, which affects how it mounts to the surface and how the rod is presented at that end. Having no pegs means the installer works with a clean flange body, which matters when the mounting surface or layout does not follow a 32 mm system. The product sits in Closet Tubing & Flanges, so its geometry is oriented to typical closet wall or panel mounting where rods terminate or change direction.
The web description notes 1-3/8 inch plastic flange with two types of flange sets available, one without pins and one with two 5 mm bore and 32 mm system pins, so you can align the hardware style to your closet panel system. For this 1323AL-42 HALF variant, the SAP description 1-3/8' DIA OPEN FLNG, ALM, NO PEGS confirms the open flange style without pins, which suits applications where you do not use 32 mm system boring for location. The description also states Packing: (1) open flange and (1) closed flange set and bulk packs, so the open and closed pieces work together at opposite rod ends, giving one access side and one fully captured side in the run. Being a 1-3/8 inch plastic flange ties the geometry to that specific rod diameter, so the pair holds the rod to its designed line without slop related to mismatched sizes.
The reference to sets with two 5 mm bore and 32 mm system pins shows that the overall 1323 family is shaped to work inside 32 mm system layouts when pins are specified, which helps when you want rod supports tied precisely to line-bored holes. This 1323AL-42 HALF version, labeled ALM and NO PEGS in the SAP description, removes those pins, which shifts the mounting to fasteners through the flange body where you determine exact location relative to cabinet construction. The Bainbridge Manufacturing brand links the flange to a recognized closet hardware source, so specifiers can keep a consistent line across rods and supports. The product is sold in both broken and full box and bulk pack quantities, which lets shops align ordering volume to single-job needs or to stocking patterns for repeat closet installations.
The 1323AL-42 HALF flange is described as a 1-3/8 inch plastic flange, so it is intended to support closet tubing with a 1-3/8 inch diameter for proper fit.
The SAP description 1-3/8' DIA OPEN FLNG indicates an open flange style, which presents one end of the rod in an open cradle, allowing rod access from the front at that end.
The web description notes sets without pins and sets with two 5 mm bore and 32 mm system pins, so pinned versions locate in 32 mm system holes while pinless versions rely on surface fastening.
The web description states Packing: (1) open flange and (1) closed flange, so one end of the rod sits in an open support while the opposite end is fully captured by the closed piece.
The Closet Rods & Flanges class identifies this part as rod-support hardware, so it is meant to anchor and support closet tubing rather than serve as general-purpose brackets.
The web description notes the product is sold in broken and full box and bulk pack quantities, so shops can stock higher volumes for repeated closet projects without changing part numbers.
The 1-3/8 inch plastic flange format, tied to Bainbridge Manufacturing 1323AL-42 HALF, lets you match hardware directly to 1-3/8 inch closet tubing on your drawings. The definition as a Closet Rods & Flanges product keeps its role focused on rod support rather than general brackets. The choice between sets without pins and sets with 5 mm bore and 32 mm system pins in the broader line gives flexibility when coordinating with system-bored panels or custom layouts. With options for both broken and full box and bulk pack quantities, it fits either one-off closet builds or recurring production runs using the same flange pattern.
Sold In: 250 Each