Pro Value Series 14" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50 Series, Right Hand Side Mount Cream - DSRS214-CMR

Pro Value Series 14 Inch Drawer Slide Use

Pro Value Series 14 inch drawer slide is a right hand side mount epoxy coated euro slide that supports 75 lb rated loads, so it handles typical cabinet storage without overbuilding the drawer box. This PRO50 epoxy coated drawer slide is a 3/4 extension self-close design, which brings the drawer most of the way out for access while pulling the drawer back into the cabinet at the end of travel. The quiet wheel premium epoxy slide uses a polymer wheel, so the drawer runs smoothly and quietly during daily use. The slide is finished in cream white epoxy, which blends with light cabinet interiors while protecting the 1.2mm cold rolled steel from abrasion in the slide track. A single captive design with a positive stop and lift out disconnect holds the drawer in the slide path yet allows deliberate removal when servicing the cabinet.

Key Euro Slide Details For Cabinet Projects

• The slide is ANSI/BIFMA tested and approved to Grade 1 requirements, so it follows a recognized performance standard important for repeat commercial or multi-unit work.
• The mounting space is 1/2 inch plus 1/32 inch, minus 0 inch clearance on each side, so the cabinet opening and drawer width can be laid out with a predictable side gap.
• The slide height is 1-1/2 inch, which matters when stacking drawers vertically in a cabinet where clearances between runners are tight.
• The material is 1.2mm cold rolled steel with an epoxy coated finish, providing a rigid slide member that resists flexing during normal use.
• The color is cream white, which helps the hardware visually recede inside many painted or light melamine cabinet interiors.

Mounting Space And Hole Layout For Installation

This side mount drawer slide uses 1/2 inch plus 1/32 inch, minus 0 inch clearance on each side, giving a straightforward formula for sizing drawer boxes to match cabinet openings. The cabinet member has 32mm mounting holes, so it lines up with cabinet rows set on the 32mm system without extra layout work. The drawer member has both bottom and side mounting holes, which gives options to anchor through the drawer side or through the underside for different drawer box constructions. The right hand side mount orientation keeps the slide references consistent when repeating multiple cabinet bays.

How This PRO50 Epoxy Slide Works In Practice

Drawer Slide Performance In Cabinets And Furniture

These 14 inch self-close euro slides are part of the Pro Value Series PRO50 line, so the format suits both face-frame and European cabinet applications where the same slide type is needed across a job. The quiet wheel premium epoxy slide uses a polymer wheel for a lifetime of quiet, trouble-free performance, which reduces rolling noise when drawers are opened repeatedly in kitchens, offices, or shops. The 3/4 extension design lets the back of the drawer stay supported in the cabinet while bringing most of the storage area into reach. The cream white epoxy coated finish on the 1.2mm cold rolled steel rail keeps the moving members gliding smoothly along the track in normal cabinet environments. The single captive configuration guides the drawer in a defined channel, so lateral play is controlled once the drawer is hung on the right hand side mount slide.

Details That Support Repeatable Fits And Replacements

The 75 lb rated load capacity means this PRO50 epoxy coated drawer slide can be specified across many standard cabinet drawers without separating heavy-duty and light-duty locations. The ANSI/BIFMA Grade 1 approval provides a documented performance level, which helps maintain consistency when using the same slide in multiple rooms or projects. The 32mm mounting holes on the cabinet member tie directly into system drilling, allowing rows of slides to register off the same hole pattern for uniform drawer reveals. Bottom and side mounting holes on the drawer member give flexibility to match different drawer box designs while still using the same DSRS214-CMR part number. The self closing action works with the positive stop, so the drawer is drawn home and then held at the closed position, which supports clean front alignment across a run of cabinets. The lift out disconnect allows the drawer to be removed from the slide when needed, which helps during finishing, transport, or later adjustments inside the cabinet.

Common Questions About This PRO50 Euro Slide

Selecting This Slide For Your Next Cabinet Run

This PRO50 epoxy coated drawer slide combines a 14 inch length, 3/4 extension travel, and 75 lb rating, so it fits many standard cabinet drawers in one specification. The side mount euro format with 32mm cabinet holes and bottom and side drawer-member holes supports both face-frame and European layouts. The self closing action, positive stop, and lift out disconnect streamline drawer alignment and later access for finishing or service. Use this DSRS214-CMR right hand side mount slide when a quiet-running, cream white epoxy coated euro slide suits the cabinet design.