Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National Signature Series chimney is a decorative wood extension piece that mounts to the wall above a Signature Series range hood cover, bridging the gap between the hood body and the ceiling in clear alder.
A range hood cover has a fixed body height, but ceiling heights vary from kitchen to kitchen. The chimney is the section that spans whatever remains between the top of the hood cover and the ceiling line. Because ceiling heights differ, this chimney is designed to be trimmed on site: the installer cuts it to the exact height the installation requires, so the finished hood reads as one continuous piece from the cooking surface to the ceiling rather than stopping short or leaving an open gap.
The chimney is made from clear alder, a species with a fine, relatively uniform grain that accepts stain evenly and paints without heavy prep. Supplied unfinished, it goes to the finisher or painter after delivery and is stained or painted alongside the hood cover and surrounding cabinetry so the whole installation matches. Because the chimney is a visible element at eye level on the wall, matching the species and finish to the adjacent cabinets is the detail that makes the installation read as built-in rather than added on.
This chimney is the right choice for a kitchen where the Signature Series hood cover is already specified and the installation runs to a wall mount above the range. It suits cabinetmakers, finish carpenters, and designers building a custom-look kitchen where the hood is meant to integrate with the cabinetry rather than stand apart as a separate appliance. Because it is an unfinished wood component, it works best when the finishing schedule treats the chimney and the hood cover together so the color and sheen land in the same place.
No. This is the chimney extension only. The Signature Series hood cover and the ventilation insert that moves the air are separate products.
The chimney ships at 23-1/2 inches tall and can be cut down on site to match the ceiling height. The amount that can be removed depends on the installation, but the trim-to-fit design gives the installer flexibility without ordering a custom height.
Yes. Clear alder has a fine, consistent grain that responds well to both stain and paint, making it a practical choice when the finish needs to match painted or stained cabinetry in the same kitchen.
The chimney ships unfinished. Most installers finish it alongside the hood cover before mounting so the color and sheen match. Finishing after installation is also possible but more difficult to control evenly.
When the ceiling height runs taller than the hood cover, this alder chimney is the part that closes the run cleanly, trimmed to fit on site and finished to match the kitchen it goes into.
Sold In: 1 Each
