Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National chimney is the upper wood extension for a Signature Series range hood cover, bridging the gap between the hood body and the ceiling in unfinished maple that accepts stain or paint to match the kitchen.
Every kitchen has a different ceiling height, and a range hood cover that fits the wall run does not always reach the ceiling on its own. This chimney is the part that closes that gap. It mounts above the Signature Series hood body and extends upward, with trimmable height so the installer can cut it down to the exact dimension the room requires. The result is a clean, floor-to-ceiling visual line above the cooktop rather than a floating hood with exposed wall above it.
The chimney is built from maple, a fine-grained species that takes stain evenly and holds paint well. It arrives unfinished so the finishing crew can apply the same stain or paint used on the rest of the hood and cabinetry after the piece is trimmed and set. Finishing after installation is the standard approach with ready-to-finish wood hood components because it eliminates the seams and color variation that come from factory-finishing parts that later need to be cut and fitted on site.
This chimney is the right choice when the Signature Series hood cover is already specified and the ceiling height calls for a separate extension piece to complete the run. It suits kitchens where the designer or cabinet shop wants the hood to read as built-in cabinetry rather than a standalone appliance fixture. Because the chimney is decorative wood and not the air-moving equipment, the ventilation unit is selected and installed separately. The chimney does not include or replace a liner, ventilator, or blower.
No. This is the chimney extension piece only. The Signature Series hood cover body and the ventilation unit are separate products, selected to suit the cooktop and the cabinet layout.
The chimney is trimmable, so it can be cut down at the job site to match the actual ceiling clearance after the hood cover is installed.
Apply stain or paint after the chimney is trimmed and installed, so the final color matches the hood body and surrounding cabinetry without color-match variation from pre-finishing separate components.
This chimney is designed for the Signature Series. Confirm compatibility with the specific hood cover model before ordering, as chimney fit is series-specific.
Specify this maple chimney when the Signature Series hood cover is in the design and ceiling height requires an extension to carry the hood from the body to the ceiling in finished maple.
Sold In: 1 Each
