Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National Signature Series trimmable chimney is the decorative wood extension that bridges the top of a compatible Signature range hood cover to the ceiling, completing the built-in look in hickory.
A wood range hood cover frames the ventilation insert and establishes the primary visual statement above the range. But between the top of the hood body and the ceiling, there is almost always a gap, and that gap is where this chimney does its job. It extends upward from the hood cover, fills the space to the ceiling plane, and makes the whole assembly read as one continuous piece of millwork rather than a hood with a void above it. Because ceiling heights vary, this chimney is trimmable, so the installer can cut it to the exact height the room requires rather than scribing around a fixed dimension.
Hickory is one of the most visually active domestic hardwoods, with strong contrast between the lighter sapwood and darker heartwood and a tight, wavy grain pattern. That character makes it a natural fit for kitchens that lean rustic, farmhouse, or craftsman, and it coordinates well with hickory or mixed-species cabinet sets that share a similar grain energy. The chimney ships unfinished, which is intentional: once trimmed to height, it can be stained, painted, or clear-coated to match the hood cover and the surrounding cabinetry as part of the finishing pass.
This piece is sized for a 30-inch-wide run and is the right choice when the hood cover below it is a compatible 30-inch Signature Series product. It suits kitchens where the designer or installer wants the hood to read as integrated woodwork rather than a standalone appliance, and it works especially well in spaces with taller ceilings where a plain gap above the hood would break the cabinetry line. Cabinet shops building a custom hood surround, designers specifying a complete wall-hood assembly, and contractors who need a species-matched extension piece will all reach for this chimney to close out the installation.
No. This is a decorative wood chimney extension only. The ventilation insert that moves the air is a separate component selected to suit the cooktop and the hood cover, and it is not included here.
Yes. The chimney is trimmable, so it can be cut to the height the installation requires. Measure from the top of the hood cover to the ceiling and trim accordingly before finishing.
No. It ships ready-to-finish, meaning the wood is unfinished and prepared to accept stain, paint, or a clear topcoat after trimming and fitting.
It is part of the Signature Series and is designed to coordinate with compatible 30-inch Omega National Signature range hood covers. Confirm the hood cover model against Omega National's Signature Series compatibility guide before ordering.
For a 30-inch Signature Series hood installation in hickory, this trimmable chimney closes the gap between the hood cover and the ceiling and ties the entire assembly into the cabinetry as finished, continuous millwork.
Sold In: 1 Each
