Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCHT30CUF1 to RSRCHT30CUF1.
30 inch wall mount trimmable chimney gives installers a ready-made wood chimney sized for a 30 inch Signature Series range hood cover, so the decorative hood layout stays consistent above standard cooktop widths. This Omega National Products component is part of the Chimneys for Wood Range Hoods class, keeping it aligned with typical custom wood hood builds in kitchen projects. The cherry construction matches cherry wood range hood covers, supporting a unified cabinet appearance on wall installations. A 31.5 inch height provides material to cut down on site, letting installers dial in the final dimension to match ceiling or cabinet terminations. The cut-to-size design supports straightforward trimming with normal shop tools, which helps keep time on the wall while still hitting exact finished elevations. Made in the USA production adds traceable origin for projects that specify domestic wood components.
The 31.5 inch height of this wall mount trimmable chimney provides extra length to cut down during installation, so the finished hood stack can meet varying ceiling heights within a project line. Because it is designed specifically for a 30 inch wide Signature Series range hood cover, layout work can center on that width without recalculating chimney proportions. The cut-to-size construction supports trimming in the shop or on site, allowing installers to respond to field conditions while keeping the decorative hood centered and square on the wall. As a Chimneys for Wood Range Hoods component, it folds into standard cabinetmaking practices, which helps crews keep jigs, saw setups, and sanding steps consistent from job to job.
This Omega National wood range hood chimney is intended for wall mount use with a 30 inch Signature Series range hood cover, placing it directly over typical residential cooking zones. The 30 inch width focus aligns with standard appliance sizing, so cabinet runs can be planned around familiar footprints. As a member of the Chimneys for Wood Range Hoods product class, it is suited to projects where the primary hood structure is already defined and the chimney needs to complete the vertical look. Cherry species alignment matches cherry wood range hood covers in the Signature Series, allowing designers to extend a cherry theme from base cabinets up through the hood feature. For kitchens that stack wall cabinets or decorative trim near the hood, the 31.5 inch height gives installers enough material to trim the chimney to meet adjacent components cleanly.
The cut-to-size chimney construction means the 31.5 inch tall piece is supplied long enough to be trimmed to the exact finished height needed, which reduces compromises when ceiling lines are slightly out of level. By starting with extra height, installers can scribe and cut to follow minor variations at the ceiling or soffit line, helping reduce visible gaps at the top of the chimney. The dedicated 30 inch width pairing with the Signature Series range hood cover keeps the chimney proportioned correctly to the hood face, which supports a balanced appearance once installed. Being part of Omega National Products wood range hood components, the chimney is geared toward typical woodworking tools and processes, helping shops produce repeatable results on multiple units. For projects covering several 30 inch appliance bays, using the same RCHT30CUF1 chimney helps keep trim reveals and visual lines consistent across the whole run.
The 30 inch wall mount trimmable chimney is designed to fit a 30 inch wide Signature Series range hood cover, so it matches that hood width in wall mounted installations.
The 31.5 inch chimney height provides extra length for trimming, so installers can cut it down to meet specific ceiling or trim conditions while keeping the hood centerline fixed.
This Omega National cut-to-size chimney is intended to be trimmed from its 31.5 inch height, letting fabricators set the final dimension during installation.
This cherry chimney is specifically designed to fit Signature Series range hood covers, aligning its width and style with that product family in kitchen projects.
Cut-to-size chimneys in this line are designed to fit 30, 36, 42, and 48 inch wide hoods, supporting a range of standard hood sizes across multiple cabinet runs.
Cut-to-size chimneys in this series are available in two heights, 23-1/2 inches and 31 inches class, giving installers options for different ceiling and design conditions.
This 30 inch wall mount trimmable chimney from Omega National Products gives installers a cherry wood component sized for 30 inch Signature Series range hood covers, helping align hood design with standard cooking widths. The 31.5 inch cut-to-size height supports field trimming, so crews can match varying ceiling elevations using one part number. As a Chimneys for Wood Range Hoods product, it suits wood hood projects where consistent species and proportions matter across multiple bays. For trade professionals sourcing through Wurth Baer Supply, this RCHT30CUF1 chimney offers a defined, project-ready option for cherry Signature Series hood layouts.
Sold In: 1 Each
