4' Aluminum Extruded Single Track 7001

4' Aluminum Extruded Single Track 7001 For Sliding Doors

4' Aluminum Extruded Single Track 7001 is an aluminum track from Hettich America Corporation designed for sliding door hardware setups. The track is extruded aluminum, which creates a consistent profile along the full 4 foot length so doors run along a uniform path. This track belongs to the sliding door hardware product class, so it is intended to guide and support doors in straight-line movement. The design is a double I beam profile, giving two internal flanges that help the running gear stay aligned under the door load. This configuration helps the door move predictably along the opening, which matters when you are sizing clearances for cabinets or room openings. The track is identified by manufacturer part number 50519, which ties directly to Hettich documentation when you are matching or repeating an installation.

Key Track Details That Support Door Layout

• The track is described as extruded aluminum double I beam track, creating a stable channel shape that maintains its geometry along the 4 foot length so rollers travel smoothly across the span.
• The part is listed for .75 single or bi-parting door applications, aligning the track with door systems in that thickness range so planning clearances and overlapping door positions stays consistent across an opening.
• The track length is 4 feet, giving a fixed run that works well for many cabinet, closet, or short passage openings so measuring reveals clearly how much travel you can design into each door.
• Branding as Hettich America Corporation sliding door hardware connects this track with a recognized hardware line, helping match it to other Hettich sliding components in a project plan.
• Category listing as builders hardware sliding door hardware gives it a defined role within a hardware schedule so it can be specified directly by product class and part number.

Sliding Door Track Mounting And Fastener Details

The extruded aluminum double I beam track is drilled with holes every 11 inches along its length, giving repeated fastening points that distribute load into the supporting structure. Regularly spaced holes speed layout because the fixing pattern is already established by the track. Recommended fasteners are #8 x 1-1/4 pan head screws, so the screw diameter and length are matched to the track material and typical backing thickness. Using pan head screws matches the track hole style, helping the screw head seat against the aluminum without distorting the profile that guides the door hardware. The 4 foot overall length combines with this repeating pattern to create a straightforward fastening sequence along studs or cabinet rails.

How This Hettich Sliding Door Track Works In Practice

Track Use With .75 Single Or Bi-Parting Doors

The SAP description lists this product as 4FTALUM.TRACK,FOR.75'SGL/BI-PARTING DOOR, defining its intended role with .75 single or bi-parting doors. That language ties the track directly to installations where one or two doors share the same upper run. In a single door setup, the 4 foot length supports one leaf sliding clear of the opening so the door can stack to one side. In a bi-parting layout, the same track type is specified for doors that move toward and away from each other along the run, so both leaves operate on a coordinated path. Because the track type is called out for these applications, it fits naturally into project notes that distinguish between hinged doors and sliding door hardware in openings of similar size.

Details That Support Consistent Sliding Performance

The extruded aluminum double I beam track design forms a defined interior profile, guiding compatible sliding components along two flanges so movement remains within a controlled channel. That double I configuration helps rollers or hangers maintain alignment, which supports predictable door motion when openings are used repeatedly throughout the day. The holes every 11 inches provide a fixed spacing for #8 x 1-1/4 pan head screws, creating a regular fastening pattern that supports the track along its entire 4 foot length. This repeated attachment spacing helps the track resist deflection between supports under door weight. The combination of defined screw size, set hole spacing, and aluminum extrusion gives installers a clear fastening pattern that supports repeatable results when multiple openings across a job share the same sliding door hardware layout.

Common Questions About This Aluminum Sliding Track

Selecting This Track For Sliding Door Hardware Runs

The 4' Aluminum Extruded Single Track 7001 combines a 4 foot extruded aluminum double I beam profile, holes every 11 inches, and #8 x 1-1/4 pan head screw recommendations in one defined part. Those details give you fixed dimensions and fastening guidance when specifying sliding door hardware. As a Hettich America Corporation sliding door hardware component, identified by part number 50519 and described for .75 single or bi-parting doors, it fits projects that call out this track style by code. Choosing this track aligns hardware selection with those documented parameters so door motion, mounting points, and track length follow the same product definition across the job.