8' Aluminum Extruded Single Track 7001

8' Aluminum Track 7001 For Sliding Doors

8' Aluminum Extruded Single Track 7001 is an extruded aluminum double I beam track designed for sliding door hardware projects where stable door travel is important. The 8-foot length supports longer openings in residential or commercial work where a continuous run is needed. The track is classified as sliding door hardware, so it serves as the main running surface in a door system using compatible rollers. The double I beam profile provides a defined running channel, which helps keep door movement aligned along the opening. This track is supplied by Hettich America Corporation, giving installers a recognizable manufacturer part number 50522 to match drawings or repeat orders. The track is intended for use with 0.75 sliding or bi-parting doors, so it fits applications built around that door thickness standard.

Key Sliding Door Track Details For Projects

• The track is made from extruded aluminum, which creates a consistent profile over the full 8-foot length and supports smooth sliding when paired with matching door hardware.
• The profile is a double I beam track, giving two flanges that define a running path for compatible rollers and help maintain straight-line door travel along the opening.
• The total length is 8 feet, so one piece spans many standard door openings without joints, which reduces alignment work at mid-span connections.
• The track is intended for 0.75 single or bi-parting doors, aligning the running surface with door systems built around that thickness for predictable clearances.
• Mounting holes are placed every 11 inches, giving regular fastening points so installers can anchor the track at consistent intervals along the header or support.
• The track is identified by manufacturer part number 50522, so it can be specified precisely in plans and reordered consistently across projects.

Mounting Pattern And Fastener Use On Track

The track has holes every 11 inches, so fastening locations are preset along the 8-foot length and reduce layout time on the job. This regular spacing helps distribute load from moving doors into the supporting structure on a consistent pattern. The web description lists screws not provided and notes recommended fasteners as #8 x 1-1/4 pan head screws, so installers can select a screw size and head style that seats properly in the holes. Using a recommended screw type helps the track sit flush against the mounting surface and supports stable door operation once the hardware set is complete.

Using This 8' Track In Sliding Door Builds

Where The 8' Extruded Track Fits Best

This 8' aluminum extruded single track 7001 fits sliding door hardware layouts that call for an 8-foot continuous header track, covering wide openings with one straight run. The product is described as extruded aluminum double I beam track for 0.75 single or bi-parting doors, so it works in projects built around that door thickness and track shape. Because it is part of the sliding door hardware category, it suits cabinet, closet, or room divider applications that rely on overhead tracks and compatible rollers. The track length allows installers to handle many standard spans without cutting multiple pieces, which can streamline layout in repetitive jobs or multi-opening runs. The double I beam profile defines a consistent channel for the door carriers, supporting repeatable motion along the entire opening.

Details That Support Alignment And Repeat Work

The hole pattern set at every 11 inches on the track gives a pre-established fastening grid, which simplifies aligning the track along a level line during installation. This regular spacing can help keep the track pulled tight to the structure at intervals that match typical framing centers, supporting even load transfer from moving doors. The extruded aluminum construction produces the same profile along the full 8 feet, so carriers designed for this track style experience a uniform running surface from end to end. The recommended #8 x 1-1/4 pan head screws match the size and head shape referenced in the web description, which supports a consistent seat in the existing holes and helps reduce head interference with door carriers. The clear identification as Hettich America Corporation part 50522 lets project documents call out this exact track, which supports repeat orders and consistent performance across projects using the same sliding door hardware standard.

Common Questions About This Sliding Door Track

Select This Track For 0.75 Sliding Door Runs

The 8' aluminum extruded single track 7001 from Hettich America Corporation combines an 8-foot length, double I beam profile, and holes every 11 inches to support smooth sliding motion on 0.75 single or bi-parting doors. The recommended #8 x 1-1/4 pan head screws and clearly defined mounting pattern help installers set the track on a consistent grid. Using manufacturer part 50522 on drawings or quotes ties future work back to the same sliding door hardware standard for repeat jobs.