Bosch 1/4 inch spade bit DSB1001 6 inch length

Bosch 1/4 Inch Spade Bit For Fast Drilling

Bosch 1/4 inch spade bit is a Daredevil spade bit designed for boring and drilling jobs where a true 1/4 inch diameter hole is needed. The full-cone threaded tip pulls the bit into the work, so the drilling action stays fast and requires less user effort on repetitive holes. A spur and reamer at the cutting edge form cleaner holes by scoring and smoothing as the bit advances, which reduces tear-out around the entry area and leaves a more finished-looking bore. The 6 inch overall length reaches through typical stock thicknesses while still fitting standard drill setups, so it suits many bench, cabinet, and general woodworking tasks. A hex shank with power groove engages the drill chuck securely, limiting slippage under torque so the bit can transmit driving force consistently during continuous work.

Key Spade Bit Details That Support Clean Work

• The 1/4 inch diameter cutting profile produces a defined hole size, which supports tasks that call for a specific clearance or pilot dimension in wood drilling.
• The full-cone threaded tip advances the bit into the material, which helps keep feed pressure low and drilling speed high on repetitive boring jobs.
• The spur and reamer cutting geometry shapes a cleaner hole edge, which matters when the appearance of the entry side of the bore is part of the finished work.
• The contoured paddle form moves chips out of the hole, which helps prevent clogging so the bit can continue cutting efficiently through the full depth.
• The hex shank with power groove resists slipping in the drill chuck, which keeps torque transfer steady when driving through tougher spots in the material.
• The 6 inch overall length offers reach beyond thin stock, which supports drilling through thicker workpieces or stacked components in one operation.

Spade Bit Fit, Length, And Shank Design In Use

The 6 inch overall length of this spade bit positions the cutting edge well beyond the drill chuck, allowing it to pass through thicker sections without bottoming out too early. That length also gives flexibility for drilling through layered assemblies in a single pass. The hex shank with power groove is built to seat firmly in standard drill chucks, which keeps the bit centered and reduces the chance of spinning under load when starting or breaking through a hole. As the full-cone threaded tip pulls the bit into the work, the contoured paddle clears chips along the flutes, so the bit can reach full depth without frequent withdrawal to clear debris. Together, these details help the bit stay engaged, track straight, and complete each bore in a consistent motion.

How This Bosch Daredevil Bit Performs On The Job

Where This Bosch Spade Bit Is Typically Used

This Bosch Daredevil spade bit sits in the boring and drilling class and is suited to woodworking situations where a 1/4 inch diameter hole is required. The 6 inch length supports boring through frames, panels, or blocking where the full depth must be reached from one side. The spur and reamer at the cutting edge favor applications where the visible face of the material benefits from a cleaner, more controlled entry profile. In general shop work, cabinet setups, or fixture building where many similar holes are drilled, the full-cone threaded tip helps advance the bit repeatedly with less physical effort. The contoured paddle keeps chips moving out of the way, so the cutting edges stay in contact with fresh material throughout the depth of the bore.

Why The Full-Cone Tip And Paddle Shape Matter

The full-cone threaded tip on this Bosch DSB1001 spade bit picks up the cut as soon as it contacts the surface, which reduces wandering at the start of a hole and helps keep the bore aligned with the drilling point. As the cone threads bite, feed is controlled by the tip rather than constant high pressure, so the operator can concentrate more on holding a steady angle. The contoured paddle behind the cutting edge is formed to direct chips out along the flute path, a detail that supports continuous cutting instead of stop-and-clear cycles. The spur and reamer geometry refines the walls and edge of the hole while the paddle manages chip flow, so the finished bore shows a smoother surface relative to a flat paddle alone. The hex shank with power groove transfers this cutting action efficiently from the drill, reducing chuck slip that could interrupt the cut.

Common Questions About This Bosch Spade Bit

Selecting This Bosch Bit For 1/4 Inch Bores

The Bosch 1/4 inch spade bit with full-cone threaded tip, spur and reamer cutting edge, and contoured paddle is built for drilling 1/4 inch holes at speed while maintaining cleaner entry edges. The 6 inch overall length and hex shank with power groove support solid chuck engagement and useful reach across many boring and drilling tasks. For projects that call for repeated 1/4 inch bores in wood with straightforward chip evacuation, this Bosch Daredevil spade bit offers a focused option ready for regular shop or jobsite drilling.