Bosch Daredevil 9/16 spade bit DSB1006

Bosch Daredevil 9/16 Spade Bit For Fast Boring

Bosch Daredevil 9/16 spade bit is a Bosch spade bit designed for boring 9/16 inch diameter holes, so installers get a consistent hole size whenever this bit is used across a run of parts. This bit is part of the Bosch Daredevil spade bits line, tying directly to Bosch performance standards that many woodworkers already rely on in drilling setups. The tool sits in the boring and drilling class, so it suits tasks where straight-through drilling in wood or similar materials is needed. The DSB1006 manufacturer part number gives a precise reference when matching existing bits or reordering for crews or multiple shops. This spade bit style supports straightforward drilling where flat-bottom-style geometry is not required, keeping the workflow simple on jigs, rough-ins, or utility boring.

Spade Bit Details That Support Cleaner Work

• The spur and reamer design provides cleaner holes, so edges around the 9/16 inch bore stay more controlled for parts that will be visible or accept hardware.
• The contoured paddle shape moves chips out faster, helping the bit clear material during drilling so the cut stays more efficient on repeated bores.
• The hex shank with power groove reduces slippage, so the bit seats more positively in the chuck and resists spinning during higher-torque drilling.
• The full-cone threaded tip drives the bit for fast and effortless drilling, pulling itself into the material so the operator applies less forward pressure on each hole.
• The 6 inch overall length gives useful reach through standard stock thicknesses, supporting common boring depths without changing to a longer tool.

Spade Bit Fit, Hex Shank Grip, And Drilling Flow

The hex shank with power groove on this DSB1006 spade bit provides a drive surface that engages the chuck more positively, so torque transfer stays steady during drilling. That groove and hex interface reduce the chance of the shank slipping under load, which helps keep the bit tracking correctly through the material. The full-cone threaded tip starts the cut and feeds the bit into the work, so the operator can concentrate on holding alignment rather than pushing hard. With a 6 inch overall length, the bit reaches through typical material stacks while still feeling manageable in the drill, which supports controlled entry and exit on each 9/16 inch hole.

Using The Bosch DSB1006 Spade Bit On Real Jobs

Where A 9/16 Inch Bosch Spade Bit Works Well

This Bosch DSB1006 spade bit sits in the boring and drilling category, so it fits jobs where straight-through 9/16 inch holes are needed in construction or shop work. The spur and reamer features interact with the cutting edge to keep the bore cleaner, which matters when a 9/16 inch opening will register a component or stay visible after installation. The contoured paddle connects to chip evacuation, so material is carried out of the hole path as the bit turns, supporting repeated drilling without frequent backing out. The full-cone threaded tip engages the surface quickly, so starting holes on layout marks becomes more predictable on subfloors, studs, or shop jigs.

Details That Help Repeatable Drilling And Alignment

The full-cone threaded tip on this Bosch Daredevil spade bit pulls the cutting edges into the material, so each 9/16 inch hole follows the same entry behavior from piece to piece. That consistent feed supports uniform breakout characteristics on the exit side, which can reduce rework on parts that will be finished. The spur and reamer design scores and cleans the edge of the bore while drilling, so the perimeter of the hole stays better defined for hardware fit or fastener clearance. The contoured paddle uses its shape to move chips away from the cutting zone, which keeps the bit cutting rather than rubbing and supports faster progress when multiple holes are laid out. The hex shank with power groove locks more firmly in the drill, so rotational slip is reduced and the bit maintains its cutting path through the work.

Common Questions About The Bosch DSB1006 Spade Bit

Choose This Bit When You Need 9/16 Inch Bores

The Bosch Daredevil 9/16 spade bit with spur and reamer, contoured paddle, hex shank with power groove, and full-cone threaded tip brings cleaner holes and faster chip removal together in one tool. The 6 inch overall length supports many drilling situations where reach and control both matter. For jobs built around 9/16 inch boring, this DSB1006 spade bit from Wurth Baer Supply keeps hole size, entry behavior, and chip flow aligned with repetitive drilling needs.