Patwin Plastics 260 Black Tee Molding, 250 ft L x 11/16" W - 3/32" Kerf - 500-260-0.687

Patwin Plastics Black Tee Molding For Edges

Patwin Plastics 260 black tee molding is a non-toxic polyethylene "Flexene" molding that forms the finished edge on panels and similar projects. The material is described as non-toxic polyethylene, so it supports use where a safer plastic is preferred in the workspace. The molding fits any contour, whether outside or inside curves and radii, so one profile handles varied layout lines on a run of panels. This same ability to follow both directions of curvature lets you keep a consistent 11/16 inch wide edge detail around complex shapes. The product is consistently precise in dimensions, workability, and color, which supports repeatable routing, steady feed, and uniform appearance from piece to piece. That level of dimensional and color consistency reduces rework when matching edges across multiple panels. The roll length is 250 ft, so a single roll supports longer production runs or multiple installations.

Key Tee Molding Details That Help On Site

• The molding is manufactured from non-toxic polyethylene, which provides a workable plastic edge while supporting material preferences in shops that prioritize non-toxic components.
• The product fits any contour whether outside or inside curves and radii, allowing a single molding profile to handle straight runs and tight or sweeping curves on the same project layout.
• The design ensures the installation will fit firmly and hug edges permanently, so once the groove and molding are matched, the profile stays seated along the routed path during regular use.
• The product is consistently precise in dimensions, workability, and color, which supports predictable router setup, smoother insertion, and consistent color match across multiple panels in a job.
• The molding width is 11/16 inch with a 3/32 inch kerf, providing a defined edge coverage and groove size that can be matched to appropriate cutters for a snug installation.
• The roll length is 250 ft, which supports larger runs of edging or multiple smaller jobs from a single part number without changing material mid-project.

Installation Fit, Kerf Size, And Edge Grip

This tee molding has a stated width of 11/16 inch, so it covers slightly over a half-inch panel edge and establishes a defined visual band around the workpiece. The kerf specification of 3/32 inch identifies the groove width that the stem is intended to engage, giving a direct target when selecting or setting up a cutter. Because the design ensures the installation will fit firmly and hug edges permanently, a correctly sized groove lets the stem lock into place along straight and curved sections. The description that the product is consistently precise in dimensions and workability supports routing the same groove size across many panels while expecting the molding to seat similarly each time.

Using Flexene Tee Moldings In Real Projects

Where This Black Tee Molding Performs Best

This black tee molding is part of the Patwin Plastics tee moldings class and is identified as T-MOULDING, BLACK, so it is aimed at creating a dark, defined edge around workpieces in that category. The material is described as non-toxic polyethylene "Flexene", which supports use in typical woodworking and fabrication environments that value formable plastics for shaping around edges. Because the molding fits any contour whether outside or inside curves and radii, it works on projects that move from straight runs into rounded corners or flowing shapes. That contour-following ability keeps the same 11/16 inch wide band visible around tabletops, panels, or similar components even as the outline changes. The consistently precise dimensions and color support jobs where multiple pieces must present the same edge thickness and tone when installed side by side.

Details That Support Consistent Edging Results

The specification of a 3/32 inch kerf gives an explicit groove width that the stem is intended to occupy, which supports dialing in cutters and setups for a tight fit. With the design stated to ensure the installation will fit firmly and hug edges permanently, the combination of groove size and molding profile is geared toward a secure mechanical grip along the routed slot. That firm fit is particularly useful when the molding tracks around outside or inside curves and radii, because the stem remains engaged as the edge changes direction. The consistent workability described for the Flexene material helps maintain a steady workflow when feeding the molding into the groove across straight sections and transitions. The consistent color described in the product information supports repeat use of the same 500-260-0.687 part number wherever a uniform black edge detail is required throughout a project or across multiple jobs. The 250 ft roll length supports running longer edges in one continuous piece, which reduces visual breaks at joints along the edge line.

Common Questions About Patwin Black Tee Molding

Selecting This Tee Molding For Edge Projects

The Patwin Plastics 260 black tee molding identified as 500-260-0.687 provides an 11/16 inch wide Flexene edge with a 3/32 inch kerf specification. The non-toxic polyethylene material, precise dimensions, and firm edge-hugging design support consistent results on both straight and curved contours. For projects that call for a uniform black tee molding across many panels or longer runs, this 250 ft roll offers a single part number to apply the same profile throughout the work.