Patwin brown bumper edge moulding is a flexible PVC "rubbery" plastic bumper edge moulding designed for protecting and finishing exposed edges. The specially formulated flexible PVC stays flexible instead of becoming brittle, which helps the edge hold up when subject to abuse in busy environments. The bumper edge moulding is part of Patwin Bumper Edge Mouldings, so it fits into projects that rely on a consistent edging system across multiple runs. The moulding is 1-1/4 in wide, giving coverage over the edge and adjacent surface for added protection where carts, doors, or materials can impact. A 1/8 in kerf is required, so installers can plan the cut width to match the barbed section for a firm mechanical grip. The roll length is 250 ft, which supports longer runs or multiple pieces from a single roll on cabinet, counter, or fixture work.
This bumper edge moulding is designed around a 1/8 in kerf, so the groove width matches the barbed section for a tight press fit in wood or composite edges. The barbed section is designed to seat firmly and hug the edge permanently, so once the kerf is cut consistently, the moulding can be driven in along the full run without additional clamping along each inch. When installers encounter a radius or curve that is too small for the moulding to bend smoothly, the barbed section can be notched, letting the moulding articulate around tighter curves while still maintaining a firm fit at each notch point. The flexible PVC "rubbery" plastic allows the moulding to flex during installation, helping it follow long edges and subtle curves without cracking.
This Patwin Plastics Bumper Edge Moulding belongs to the Bumper Edge Mouldings product class, so it is intended for applications that need a resilient edge around worktops, panels, or fixtures. The brown color and 1-1/4 in width let it visually frame and protect edges where appearance and impact resistance both matter. The flexible PVC "rubbery" plastic will not become brittle, so edges remain cushioned where people, carts, or materials frequently contact corners. The 250 ft roll format supports shop runs where multiple cabinets, counters, or panels share the same edge specification for a uniform finish. Because the moulding is designed to seat firmly and hug the edge permanently, it suits projects where once the edge is installed, it is expected to stay in place for long-term use without periodic resetting.
The self-healing effect of the flexible PVC when subject to abuse means that small compressions from bumps do not stay sharply deformed, helping the edge look serviceable longer between remodels. The 1/8 in kerf requirement gives a clear target for tooling, so installers can set blades or cutters to deliver a repeatable groove that matches the barbed section across all panels in a job. When a radius or curve is too small, simply notching the barbed section lets the moulding track the curve while still gripping at each notch, which reduces the chance of the edge lifting at tight corners. The design to seat firmly and hug the edge permanently supports clean, straight sight lines along long edges because the profile stays aligned once pressed into place. As part of Patwin Bumper Edge Systems, this bumper moulding coordinates with other bumper edge solutions on jobs that standardize around Patwin profiles.
The bumper moulding uses specially formulated flexible PVC "rubbery" plastic, which will not become brittle and supports long-term resilience under repeated contact.
The 575-857-1.250 bumper moulding is 1-1/4 in wide, giving coverage across the edge and adjacent surface where impact protection is needed.
This Patwin bumper edge moulding is designed for a 1/8 in kerf, so the barbed section fits tightly into a properly sized groove.
The bumper moulding has a self-healing effect when subject to abuse, allowing minor dents to recover and helping the edge maintain a more uniform appearance.
When a radius or curve is too small, the barbed section can be notched so the moulding can follow tighter curves while keeping a firm fit.
This Patwin Plastics brown bumper edge moulding roll is 250 ft long, supporting longer continuous edges or multiple pieces from a single roll.
The Patwin brown bumper edge moulding 575-857-1.250 combines a 1-1/4 in width, 1/8 in kerf design, and flexible PVC "rubbery" plastic that will not become brittle, so edges stay cushioned under repeated contact. The self-healing effect under abuse, together with a barbed section that seats firmly and hugs the edge permanently, supports long-lived edging on cabinets, tops, and fixtures. With a 250 ft roll length, this bumper edge moulding fits both shop batches and onsite work where a consistent brown bumper profile is needed across multiple pieces. For projects calling for Patwin Bumper Edge Mouldings in brown, this part number provides a defined, repeatable edge solution.
Sold In: 250 Lineal Ft
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 250 Lineal Ft |  PWP575-1-1/4-260 Mfr# P575-1-1/4-260 | Patwin Plastics 260 Black Bumper Edge Mouldings, 250 ft L x 1-1/4" W - 1/8" Kerf - P575-1-1/4-260 | ||||
Sold in: 250 Lineal Ft | PWP575-1-1/4-601 Mfr# 575-227-1.250 | Patwin Plastics 227 White Bumper Edge Mouldings, 250 ft L x 1-1/4" W - 1/8" Kerf - 575-227-1.250 |