Glass door overlay hinge painted black is a free swinging Wood Technology glass door hinge designed for overlay glass doors that need a separate latch to stay closed. The hinge construction is free swinging, so the door moves without internal closing resistance, which suits applications where a latch or catch controls the final closing position. The requirement for a latch to hold the door closed keeps the door firmly seated at rest, which helps maintain alignment on frequently used cabinets. The hinge is specified for 3/16 inch to 1/4 inch glass thickness, so it supports common cabinet glass sizes used in many shop and built-in projects. With a black painted finish, the hinge presents a dark, uniform appearance that works with black or dark-toned cabinet hardware runs. The painted black surface also visually masks minor handling marks, which is useful during installation and adjustment.
The hinge mounts to the sidewall at both the top and bottom, so the cabinet design must provide solid sidewall attachment points at those locations. This sidewall top and bottom mounting pattern spreads the load along the door edge, which supports even movement on taller or heavier glass doors within the stated thickness range. The hinge amount of overlay is 7/32 inch, so the glass door edge extends that distance over the cabinet side, which is important for aligning the hinge position with adjacent doors or face trim. With a face plate size of 3/4 inch high by 9/16 inch wide, the installer can plan precise boring or fastening locations that keep the plate fully supported on the sidewall.
This Wood Technology free swinging overlay glass door hinge is specified for glass thickness between 3/16 inch and 1/4 inch, so it fits many standard cabinet glass panels used in residential and commercial casework. The hinge mounts on the cabinet sidewall at the top and bottom, which suits frameless-style cabinets or side panels where there is enough height to place both mounting points. With a 7/32 inch overlay, the glass door covers part of the sidewall, which works well when you want the glass edge to sit slightly past the cabinet side rather than flush. The 194 degree angle of opening allows the door to swing wide beyond straight open, which is useful on display cabinets or storage units where full access to shelves is important. The black painted finish blends into dark interior casework, so it works well in darker-color cabinet runs.
The sidewall top and bottom mounting style gives two vertically separated anchor points, which distributes stress along the glass edge and hinge, supporting smoother motion over repeated openings. The defined glass thickness range of 3/16 inch to 1/4 inch helps limit setup variables, because glass within that range will match the hinge design without guessing about fit. The 7/32 inch overlay dimension provides a known coverage amount, so repeated layouts across multiple doors stay consistent without recalculating edge distances each time. The 3/4 inch high by 9/16 inch wide face plate gives a compact footprint, which leaves more room near the hinge area for adjacent hardware like latches that are needed to hold the free swinging door shut. The 194 degree opening lets doors swing well past 90 degrees, which keeps the door plane away from the cabinet opening and eases loading, unloading, and shelf adjustments inside the case.
The Wood Technology free swinging overlay glass door hinge is designed for overlay glass doors in the 3/16 inch to 1/4 inch glass thickness range, so it suits typical cabinet and display glass panels.
The free swinging design means the hinge does not hold the door shut, so a separate latch keeps the door closed, which allows controlled closing and firm retention at the final position.
On this hinge, a 7/32 inch overlay means the glass door edge overlaps the cabinet sidewall by that distance, which helps define reveal lines across a bank of matching doors.
This hinge mounts to the cabinet sidewall at both the top and bottom positions, so the glass door is supported along the vertical edge at two spaced mounting points.
The hinge has a 194 degree angle of opening, so the door can swing past fully open, which clears the cabinet opening for easier access to interior shelves and contents.
The face plate on this hinge measures 3/4 inch high by 9/16 inch wide, which guides layout for mounting and confirms clearance near cabinet edges and neighboring hardware.
This Wood Technology glass door overlay hinge in painted black is specified for 3/16 inch to 1/4 inch glass, with a 7/32 inch overlay and 194 degree opening, so it addresses many overlay glass cabinet door layouts. The sidewall top and bottom mounting pattern supports doors along their vertical edge, which is useful on full-height or frequently used glass doors. The free swinging action and requirement for a latch allow you to pair the hinge with latch hardware that suits the cabinet use. For projects calling for a black painted overlay glass hinge with these dimensions and motion, this 7075.001.060 model from Wurth Baer Supply provides a focused option.
Sold In: 1 Pair