Salice 200 Series Logica Self-Close Overlay Face-Frame;Frameless Blind Corner Hinge Nickel, 110° Toolless - C2J6N99AM

Salice 200 Series Blind Corner Hinge Solution

Salice 200 Series blind corner hinge gives you a concealed long arm hinge specifically developed for blind corner cabinet applications where a standard hinge will not work cleanly. This hinge sits in Salice's integrated Series 200 system, so it functions as part of a family of concealed hinges designed to cover a wide range of cabinet projects with one logic. The hinge is self-close, so the door is pulled shut at the end of travel, which keeps residential or commercial cabinet doors consistently closed without extra catches. As a European concealed cabinet hinge, it keeps the hardware out of sight, leaving the cabinet face clean for finished kitchens, offices, or casework. The design supports both residential and commercial cabinets, giving you a single hinge type that fits mixed-use projects and streamlines your hardware standardization.

Key Blind Corner Hinge Details For Pros

• The hinge is described as a long crampon hinge, which provides the extended geometry needed to address blind corner layouts, so you can solve corner door clearance without resorting to improvised hardware stacks.
• As a concealed cabinet hinge in the European blind corner hinge class, it keeps the arm and cup hidden inside the cabinet, creating a clean exterior line that matches modern casework expectations on both face frame and frameless runs.
• The hinge is designed for use in both residential and commercial cabinets, so one part number can be specified across kitchens, office casework, and similar builds, simplifying purchasing and reducing part variation on site.
• Series 200 hinges are compatible with Smove soft-close, so projects using Smove can rely on this blind corner hinge as part of a coordinated Salice layout without shifting away from a known hinge family.
• The hinge is designed to work with all Salice mounting plates, letting you stay with a single plate standard across cabinet lines and adjust overlay or setback through plate choice rather than changing hinge bodies.

Mounting And Adjustment For Blind Corner Use

The blind corner hinge has a cup depth of only 11 mm, so it can be used on many cabinet door profiles that would be too thin for deeper cups, reducing risk of break-through on routed or profiled doors. The hinge cup edge drilling distance of 3 mm to 6 mm gives a usable range during boring, which supports small layout variations while still keeping the hinge within its designed geometry. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm is built into the hinge arm screw, so you can shift the door laterally without skewing it, helping align reveals along adjacent fronts. Because this hinge is designed for both face-frame and frameless blind corner work, it offers flexibility in layout when cabinet construction varies from room to room.

Using This Salice Hinge In Real Projects

Where This Blind Corner Hinge Performs Best

This Salice 200 Series Logica self-close overlay blind corner hinge is intended specifically for blind corner cabinet conditions, so it addresses the geometry where a standard hinge would clash with the adjacent cabinet. Being part of an integrated system of Series 200 long inset blind corner hinges, it supports projects where multiple door conditions need to be covered with a unified hinge line. The all steel hinge construction keeps the core of the hardware in a familiar material while it works inside residential or commercial casework. Nickel plating on the hinge delivers corrosion resistance, which supports long-term function in typical cabinet environments such as kitchens, baths, or workrooms. The permanently self lubricating design, using environmentally safe lubricants, maintains hinge movement over time so doors continue to operate smoothly through repeated use.

Why These Hinge Details Support Repeatable Results

The hinge exceeds ANSI/BHMA Grade 2 standards, so it meets a recognized performance level that supports demanding commercial or higher-use residential projects where cycle count and strength are important. At the same time, it meets ISO9001 and ISO14001 environmental certifications, tying the hinge to documented quality and environmental management systems that support spec-driven work. The self-close function provides dependable closing action at the end of door travel, which limits doors sitting partially open and helps maintain consistent sight lines across a bank of fronts. Because it is available in self-closing only, there is no ambiguity about the closing behavior when this part number is called out on a plan. The compatibility with all Salice mounting plates allows installers to rely on a known plate program, reducing adjustment time and keeping replacements straightforward when casework is modified or expanded later.

Common Questions About This Salice Corner Hinge

Choose This Hinge For Blind Corner Projects

This Salice C2J6N99AM self-close overlay blind corner hinge offers a European concealed design tailored to blind corner cabinet conditions, so it addresses tight layouts where clearance is critical. Its 11 mm cup depth, 3 mm to 6 mm cup edge drilling range, and parallel side-to-side adjustment give you workable tolerances at boring and installation while still allowing precise reveal tuning. Nickel plated, self lubricating, and built to exceed ANSI/BHMA Grade 2 standards, it fits both residential and commercial casework where performance and clean appearance are expected. For projects already using Salice mounting plates or Smove soft-close, this hinge keeps everything within the same Series 200 system for straightforward specification and installation.