Salice 200 Series Blind Corner Hinge Solution

Salice 200 Series blind corner hinge is a long inset blind corner hinge that forms part of an integrated system of hinges developed to provide a solution for projects using concealed hinges, giving installers a consistent approach across multiple cabinet layouts. As a concealed cabinet hinge in the European blind corner hinge class, it keeps hardware out of sight while still delivering controlled door motion, which helps finished cabinetry look clean and professional. The hinge is designed for overlay applications on both face-frame and frameless blind corner cabinets, so one hinge style can serve different construction methods in the same job. Being available in self-closing only, it pulls the door shut once near the closed position, which helps doors sit properly without constant adjustment after installation.

Key Blind Corner Hinge Details For Projects

• The Salice Series 200 long inset blind corner hinge is part of an integrated system of hinges, so installers can standardize on one hinge family and maintain predictable drilling patterns and adjustments across a run of cabinets.
• The long crampon hinge design is tailored for blind corner applications, helping the door clear adjacent components while still supporting stable movement over repeated use.
• Design for use in both residential and commercial cabinets means the same hinge model can be specified across mixed projects, simplifying ordering and reducing product variation on the job.
• The hinge exceeds ANSI/BHMA Grade 2 standards and meets ISO9001 and ISO14001 environmental certifications, supporting demanding cabinet environments while reflecting controlled manufacturing and environmental processes.
• The all steel hinge is nickel plated for corrosion resistance and is permanently self lubricating using environmentally safe lubricants, which supports smoother operation over time in typical kitchen or commercial humidity.
• Blind corner hinge cup depth of only 11 mm increases compatibility with many cabinet door profiles, giving more flexibility when working with profiled doors or thinner construction.
• A hinge cup edge drilling distance of 3 mm to 6 mm provides usable tolerance in boring layouts, which helps installers adapt to small variances in door sizing or existing machining.
• The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via a hinge arm screw allows precise parallel alignment of the door, which is valuable for tightening reveals and reducing rework after hanging.
• The Series 200 hinges are compatible with Smove soft-close, so projects that need soft-closing action can build on the same hinge line while keeping adjustment characteristics familiar.
• The hinge is designed to work with all Salice mounting plates, letting installers match the hinge to existing Salice plate inventories and plate heights already in their shops.
• Being sold in both broken and full box quantities allows shops to order the Salice C2P6N99AM hinge for small repairs or large runs using the same specification.

Overlay Blind Corner Hinge Mounting Details

This Salice America concealed cabinet hinge is configured as an overlay face-frame and frameless blind corner hinge, so it supports overlay doors on both common cabinet constructions without changing hinge model. The hinge cup depth of only 11 mm means the door recess is relatively shallow, which can simplify boring on doors where material thickness is limited. A hinge cup edge drilling distance of 3 mm to 6 mm gives a practical drilling window, allowing the boring position to be tuned to door overlay and profile without changing hinge type. Patented parallel side-to-side adjustment from plus 4.5 mm to minus 1.5 mm through the hinge arm screw then lets the installer fine-tune reveals after mounting, aligning doors in relation to adjacent fronts and face-frames in blind corner runs.

Using This Blind Corner Hinge In Cabinet Runs

Where This Salice Hinge Fits In Cabinets

This Salice 200 Series self-close overlay face-frame and frameless blind corner hinge is designed for blind corner cabinet applications in both residential and commercial cabinets, allowing one hinge specification to carry across kitchen, bath, or commercial casework using concealed hardware. As part of the European concealed long arm hinge category, it suits projects where the hinge arms must provide reach and articulation inside a blind corner, keeping the hinge hidden while still clearing adjacent boxes or frames. The long crampon hinge configuration helps support the door in these blind areas, providing robust engagement to the cabinet while the door swings. Because the hinge is designed to work with all Salice mounting plates, it can be matched to plate choices that set overlay and height in face-frame cabinets or frameless carcases, which is useful when aligning doors around a blind corner intersection. The compatibility of Series 200 hinges with Smove soft-close gives designers and installers a way to add soft-close functionality in future or on select doors without changing the underlying hinge family.

Adjustment And Performance For Repeatable Results

The patented parallel side-to-side adjustment range of plus 4.5 mm to minus 1.5 mm via the hinge arm screw provides a defined window for aligning doors, which helps installers tune gaps consistently along tall doors or multiple fronts sharing a common blind corner. With the hinge available only in self-closing form, doors are drawn into their closed position once near the cabinet, supporting consistent closing without relying on external catches. The all steel hinge body, nickel plated for corrosion resistance, is permanently self lubricating with environmentally safe lubricants, so the hinge is engineered to move smoothly through repeated cycles in typical cabinet environments. Exceeding ANSI/BHMA Grade 2 standards and holding ISO9001 and ISO14001 environmental certifications, the hinge is built to satisfy recognized performance and process benchmarks that matter on demanding residential or commercial installations. The shallow 11 mm cup depth together with the 3 mm to 6 mm cup edge drilling range supports field flexibility, giving room to adjust boring while still keeping the hinge within its design envelope for correct motion.

Common Questions About The Salice C2P6N99AM Hinge

Choose This Hinge For Blind Corner Projects

The Salice 200 Series blind corner hinge C2P6N99AM gives installers a concealed, self-closing solution for overlay face-frame and frameless blind corner cabinets, keeping one hinge family across residential and commercial projects. Its 11 mm cup depth, 3 mm to 6 mm cup edge drilling distance, and patented parallel side-to-side adjustment from plus 4.5 mm to minus 1.5 mm combine to support practical boring layouts and precise final door alignment. With all steel nickel plated construction, permanent self lubrication using environmentally safe lubricants, and performance exceeding ANSI/BHMA Grade 2, this hinge is engineered for demanding cabinet runs. Select this hinge when a European concealed long arm blind corner hinge is required for consistent appearance and adjustment across your cabinet installation.