Domi Snap-On 2-Cam Adjustable Straight Mounting Plate, Nickel-Plated, Dowelled, 6mm

Domi Snap-On Mounting Plate For Hinge Setup

Domi snap-on 2-cam adjustable straight mounting plate is a Salice America hinge mounting plate built for the Domi slim style hinge system. This die-cast steel plate provides the structural base that ties the hinge arm to the cabinet side, so door motion stays controlled over time. The straight plate design establishes a consistent reference line for your overlay layout, which supports repeatable cabinet runs. Nickel-plated, corrosion-resistant construction keeps the hinge interface protected in typical cabinet environments where metal parts face long-term wear. As a hinge base plate in the Salice Domi family, it lets installers match hinge and plate engineering from a single system, helping door alignment remain predictable across multiple openings.

Key Mounting Plate Details For Cabinet Work

• This hinge mounting plate is constructed of die-cast steel, giving the plate a solid body that supports door loads at the hinge connection and resists deformation during installation and long-term use.
• Nickel-plated, corrosion-resistant finish protects the steel at the hinge interface, which helps maintain smooth motion and consistent adjustment response in normal cabinet and shop environments.
• Height adjustment by eccentric cam of plus or minus 2 mm is engineered into the plate, so installers can fine-tune vertical door position at the cabinet side instead of remounting hinges.
• Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm allows controlled in-and-out positioning of the door, helping align reveals and close gaps without shifting the cabinet or drilling new holes.
• The cabinet side attachment method uses knock-in 10 mm dowels, which provides a quick, repeatable location in prepared holes and helps maintain plate position during hinge arm attachment.
• This Salice Domi slim style hinge mounting plate carries a lifetime warranty, reflecting a design intended for long service where hinge adjustment and alignment need to remain stable.

Mounting Plate Installation And Fine Adjustment

This Domi snap-on 2-cam adjustable straight mounting plate is designed for cabinet side attachment using knock-in 10 mm dowels, so once holes are bored, the plate seats positively without extra layout steps. Height adjustment by eccentric cam of plus or minus 2 mm is built into the plate, so installers can move the door up or down at the hinge interface to tune reveals along the cabinet. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm lets the user bring the door closer to or further from the cabinet front, which is useful for flush alignment and consistent spacing on multi-door runs.

Using The Salice Domi Hinge Mounting Plate

Where This Hinge Base Plate Fits Best

The Salice Domi snap-on 2-cam adjustable straight mounting plate is part of the Salice "Domi" slim style hinge mounting plates range, so it fits projects built around that hinge family. As a straight hinge mounting plate, it suits cabinet layouts where a standard plate height is desired, providing a consistent datum for overlay calculations along a row of doors. The knock-in 10 mm dowel cabinet side attachment layout suits production or repeat drilling patterns, because once the 10 mm dowel holes are bored, the plate locates firmly at the same position from cabinet to cabinet. This plate acts as the fixed reference on the cabinet side, so the hinge arm can snap on and off while the base position remains stable.

Adjustment Cams That Support Repeatable Results

Height adjustment by eccentric cam plus or minus 2 mm on this Domi mounting plate allows precise vertical tuning of door position after the plate is installed, which reduces the need to alter bore locations or rework the cabinet if reveals are slightly off. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm provides controlled in-and-out movement at the hinge connection, so the door can be brought into plane with adjacent fronts and frameless cabinet edges. Because both adjustments are built directly into the plate, a single mounting layout can handle small variations in drilling or door construction without changing hardware. The nickel-plated, corrosion-resistant surface maintains the smooth operation of these cams over time, supporting predictable adjustment when cabinets are serviced later in their life.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Your Hinge Layout

The Domi snap-on 2-cam adjustable straight mounting plate, Salice part BAP7R69, suits installations built around Salice "Domi" slim style hinges where dialed-in reveals matter. With die-cast steel construction, nickel-plated corrosion-resistant finish, and built-in height and depth adjustment cams, it provides a stable cabinet-side base that still allows fine tuning. For cabinet runs that rely on knock-in 10 mm dowels and a straight plate reference, this hinge mounting plate supports consistent alignment across multiple doors.