
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Domi Snap-On hinge mounting plate from Salice America is a stamped steel hinge mounting plate designed for cabinet installers who use Salice Series F and Series B hinges. The Euro screw attachment ties directly into standard system holes, so the plate integrates into European-style cabinet construction without layout changes. The 6mm height plate establishes a consistent overlay reference, which helps keep door reveals uniform across a run of cabinets. Nickel plated, corrosion-resistant steel holds up in typical shop and kitchen environments, so the plate maintains its function over time. The economical clip-on design works with Salice Series F and Series B hinges, allowing quick hinge removal and refitting during installation or service. With this single mounting plate, installers can standardize hardware across multiple Salice hinge bodies while keeping adjustment predictable.
This Salice hinge mounting plate uses Euro screw attachment, so it fastens into European-style system holes in the cabinet. The 6mm height sets the working distance between the hinge arm and the cabinet side, forming the basis for overlay and reveal. Depth adjustment from -0.5 mm to +2.8 mm is controlled by an eccentric cam, allowing the door to move in and out relative to the cabinet front while the plate stays fixed. Height adjustment of plus or minus 2 mm uses slotted holes, making it possible to slide the plate slightly up or down on the cabinet wall. The clip-on interface with Salice Series F and Series B hinges lets the hinge arm snap to the plate, which speeds installation and later door removal during finishing or service.
This Domi Snap-On hinge mounting plate is classified as a hinge mounting plate in the Salice America line, so it serves as the interface between cabinet and hinge arm in a concealed hinge system. Its Euro screw attachment fits cabinets drilled on a European system pattern, tying directly into pre-bored holes in cabinet sides or panels. The 6mm height plate creates a defined offset for Salice Series F and Series B hinges, so installers building frameless cabinets can repeat the same plate across multiple openings. The standard 37 mm x 32 mm positioning lines up with common boring layouts used in shops, allowing the drilling process to stay consistent from cabinet to cabinet. Because the plate is nickel plated and corrosion-resistant, it suits typical residential and commercial cabinet interiors where humidity and regular use are expected.
The single cam adjustment design provides depth movement from -0.5 mm to +2.8 mm, giving installers a controlled way to pull doors closer to or further from the cabinet face. This adjustment happens through an eccentric cam in the plate, so small turns translate into precise shifts that help tune door reveal after the boxes are installed. Height adjustment of plus or minus 2 mm relies on slotted holes, allowing the plate to slide slightly along the cabinet wall, which is useful for aligning door tops and bottoms across a bank. Because the clip-on plate is compatible with all Salice hinges Series F and Series B, installers can swap hinge arms for different door applications while keeping the same plate and adjustment logic. The stamped steel construction maintains stable geometry under load, so those fine adjustments hold as doors are used over time.
The mounting plate is compatible with all Salice hinges Series F and Series B, so one plate style can support multiple concealed hinge models on the same project.
The hinge mounting plate uses Euro screw attachment, which fastens directly into European-style system holes in the cabinet side or panel.
The single cam provides depth adjustment from -0.5 mm to +2.8 mm, allowing precise in-and-out door alignment relative to the cabinet front.
The hinge mounting plate offers plus or minus 2 mm of height adjustment through slotted holes, which helps align doors vertically along the cabinet run.
The plate uses a standard 37 mm x 32 mm positioning, matching common European drilling layouts used in cabinet manufacturing.
The nickel plated, corrosion-resistant finish protects the stamped steel base, supporting long-term function in typical kitchen and casework environments.
The Domi Snap-On hinge mounting plate from Salice America combines Euro screw attachment, a 6mm height, and a single cam depth adjustment from -0.5 mm to +2.8 mm to support precise door alignment. Height adjustment of plus or minus 2 mm by slotted holes adds another axis of control, which is useful when tuning multiple doors in a bank. Compatibility with all Salice hinges Series F and Series B allows standardization on one plate style across many openings. With a nickel plated, corrosion-resistant stamped steel body and a lifetime warranty, this hinge mounting plate provides a stable base for everyday cabinet use.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBBAVGE99F16 Mfr# BAVGE99F/16 | Clip-On Cam Adjustable Wing Mounting Plate, Nickel-Plated, Pre-Mounted Euro Screws, 9mm | ||||
Sold in: 1 Each | UBBAVGEC9F16 Mfr# BAVGEC9F/16 | Clip-On Cam Adjustable Wing Mounting Plate, Nickel-Plated, Die-Cast Steel, Pre-Mounted Euro Screws, 12mm | ||||
Sold in: 1 Each | UBBAVGEV9F16 Mfr# BAVGEV9F/16 | Clip-On Cam Adjustable Wing Mounting Plate, Nickel-Plated, Pre-Mounted Euro Screws, 18mm |