Clip-On Cam Adjustable Wing Mounting Plate, Nickel-Plated, Pre-Mounted Euro Screws, 9mm

Clip-On Cam Adjustable Wing Mounting Plate Use

Clip-On Cam Adjustable Wing Mounting Plate describes a Salice America hinge mounting plate designed for use with Salice hinges Series F and Series B, so it suits projects already using those hinge families. The 9mm plate height positions the door relative to the cabinet side, which helps keep reveals consistent across a run of doors. This economical clip-on plate connects with compatible Salice hinges using a clip-on action, which speeds up hinge installation and removal during fitting or service. The plate is part of the Salice hinge system, so it serves as the interface between hinge arm and cabinet side in many standard cabinet layouts. Nickel-plated, corrosion-resistant construction helps the plate stand up to typical cabinet environments where moisture and cleaning chemicals may be present, supporting long-term hinge performance.

Mounting Plate Details That Support Projects

• The plate is compatible with all Salice hinges Series F and Series B, so it works across multiple hinge models in those families and simplifies stocking for repeat jobs.
• Depth adjustment from -0.5 mm to +2.8 mm by eccentric cam lets you fine-tune door overlay at the cabinet, which helps dial in reveals without re-drilling hinge positions.
• Height adjustment of plus or minus 2 mm by slotted holes allows vertical door movement at the plate, which helps align doors to each other after the hinges are mounted.
• The standard 37 mm x 32 mm positioning follows a common drilling layout, so it fits typical cabinet boring patterns used in many shop setups and CNC programs.
• Pre-mounted Euro screws are built into the plate, letting you mount it directly into the system holes and maintain alignment with 32 mm cabinet construction methods.
• Nickel-plated, corrosion-resistant finish protects the plate surface in normal kitchen and bath conditions, which supports smooth hinge function over time.

Installation And Adjustment On Cabinet Runs

This hinge mounting plate uses pre-mounted Euro screws, so it fastens into euro-style system holes in the cabinet side and ties directly into 32 mm construction. The 9mm plate height sets a known starting position for the door, which helps when repeating the same layout across multiple cabinets. Height adjustment of plus or minus 2 mm at the slotted holes provides post-install vertical tuning, so you can line up door tops and bottoms without shifting the cabinet. Depth adjustment from -0.5 mm to +2.8 mm by eccentric cam lets you move the door closer or farther from the cabinet front, which is useful for compensating for door thickness or edge banding. Because the plate is compatible with all Salice hinges Series F and Series B, one mounting approach can serve many door styles that share those hinge series.

Using This Salice Mounting Plate In Work

Where This 9mm Salice Plate Fits Best

This hinge mounting plate is a component in the Salice America hinge system, designed specifically for all Salice hinges Series F and Series B, so it fits jobs that standardize on those concealed hinge lines. The 9mm plate height works with layouts expecting that specific offset, which helps maintain consistent overlay and gap relationships in frameless cabinet construction. Standard 37 mm x 32 mm positioning matches a widely used boring pattern, so it suits production shops and installers using common drilling jigs or CNC libraries. Pre-mounted Euro screws match euro-style cabinet sides, tying directly into 32 mm hole patterns to speed repetitive installs across large kitchen or commercial layouts. Nickel-plated, corrosion-resistant construction supports use in kitchen and bath environments, where humidity and cleaning can otherwise affect exposed steel components.

Adjustment Range That Reduces Door Rework

The depth adjustment range of -0.5 mm to +2.8 mm is controlled by an eccentric cam on the plate, which allows precise front-to-back positioning of the door after the hinge and plate are installed. This adjustment helps correct minor drilling tolerances or material variations without moving the cabinet or re-boring hinge holes. Height adjustment of plus or minus 2 mm by slotted holes gives vertical door movement at the plate, so you can tweak door lines to match adjacent fronts in a bank of cabinets. The clip-on connection between the hinge arm and this plate supports rapid mounting and removal of doors, which helps during finishing, transport, or field service on installed cabinets. An economical design combined with a lifetime warranty supports long-term use in repeat projects where stable hardware sourcing and performance are important to the workflow.

Common Questions About This Salice Plate

Choosing This Plate For Salice Hinge Jobs

This Salice America hinge mounting plate suits projects built around Salice hinges Series F and Series B, giving one 9mm solution for many cabinet runs. The standard 37 mm x 32 mm layout and pre-mounted Euro screws align with euro-style construction methods, which supports efficient shop production and field installation. Depth adjustment from -0.5 mm to +2.8 mm and height adjustment of plus or minus 2 mm help fine-tune door alignment without revisiting drilling steps. Nickel-plated, corrosion-resistant construction and a lifetime warranty support long service life on residential or commercial cabinetry using this hinge system.