Clip-On Cam Adjustable Wing Mounting Plate, Nickel-Plated, Die-Cast Steel, Pre-Mounted Euro Screws, 12mm

Clip-On Cam Adjustable Wing Mounting Plate Use

Clip-on cam adjustable wing mounting plate describes a Salice America hinge mounting plate designed for use with Salice hinges. The plate is compatible with all Salice hinges Series F and Series B, so it ties directly into common Salice concealed hinge runs without changing hinge families on the job. The 12mm plate height positions the door relative to the cabinet in a predictable way, supporting consistent reveals across a run of fronts. Made from die-cast steel, the plate builds a rigid base under the hinge arm, which supports long-term alignment of doors in regular cabinet service. The nickel-plated finish is corrosion-resistant, so the plate performs well in typical interior environments where moisture or cleaning products are present. As a hinge mounting plate in the Salice system, it provides the interface between the cabinet side and the hinge arm, giving you adjustment points at the plate instead of relying only on the hinge.

Key Mounting Plate Details For Daily Work

• This Salice America hinge mounting plate is described as economical, which helps control hardware cost across larger cabinet runs while still staying within the Salice hinge system.
• Compatibility with all Salice hinges Series F and Series B lets you standardize on one plate style for multiple hinge models, simplifying layout, drilling patterns, and hinge selection on repeat projects.
• Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam gives you a fine-tune range at the plate, so you can move doors in or out at the cabinet without redrilling or changing hinge arms.
• Height adjustment of plus or minus 2 mm by slotted holes allows vertical movement of the door relative to the cabinet side, helping align reveals and tops of doors even when drilling or installation varies slightly.
• The standard 37 mm x 32 mm positioning matches a known layout, supporting efficient boring setups and repeatable results when you are running multiple cabinets or using jigs and line-boring equipment.
• The nickel-plated, corrosion-resistant finish supports hinge performance in normal cabinet interiors where humidity and cleaning can affect exposed steel, helping maintain appearance and function over time.

Mounting And Adjusting The Salice Hinge Plate

This hinge mounting plate uses depth adjustment of -0.5 mm to +2.8 mm by an eccentric cam, so turning the cam at the plate moves the door in or out relative to the cabinet face for precise alignment. Height adjustment of plus or minus 2 mm is handled by slotted holes, letting you shift the plate up or down on the cabinet panel to correct reveals or door-to-door alignment after initial installation. The plate works as a clip-on interface with Salice hinges, so the hinge arm can be attached and removed from the plate without distorting the plate position, which supports repeat adjustments or door removal during finishing or service. The pre-mounted Euro screws connect the plate to Euro-style system holes, integrating the plate into standard 32 mm line-boring patterns used in many cabinet shops.

Mounting Plate Role In Cabinet Hinge Runs

Where This Salice Hinge Mounting Plate Fits

This hinge mounting plate is identified as a hinge mounting plate in the Hinge Mounting Plates product class, positioning it specifically as the base component for Salice concealed hinges rather than a general bracket. Compatibility with all Salice hinges Series F and Series B means it is used wherever those hinges are specified, whether on frameless cabinets or other constructions that use the same hinge family. The standard 37 mm x 32 mm positioning coordinates with common cabinet drilling systems, so it fits into production lines or shop-built runs that rely on that center-to-center layout. Because the plate has a 12mm height, it sets a defined offset between cabinet and hinge arm, which affects overlay or inset relationships in systems designed around that dimension. The pre-mounted Euro screws are geared to Euro-style construction, supporting applications that rely on system holes rather than face-frame screw patterns.

Why These Adjustment And Material Details Matter

The depth adjustment range of -0.5 mm to +2.8 mm by eccentric cam concentrates fine-tuning at the plate, so small case deviations or door thickness variations can be corrected without replacing hinges, which is useful in both custom and production work. Height adjustment of plus or minus 2 mm provided by slotted holes offers a practical margin for drilling tolerances, making it easier to line up multiple doors along a tall bank or across a wide run. The die-cast steel construction gives the plate a solid bearing surface under the hinge arm, which supports repeated adjustments at the eccentric cam without deforming the mounting point. Nickel-plated, corrosion-resistant finish helps the plate hold up in kitchen and bath environments where humidity and cleaning agents are present, supporting long-term smooth operation of the hinge joint. The economical description indicates it is positioned as a cost-effective component within the Salice system, which matters when specifying hardware for large installations where plate choice affects overall project cost. Working within a hinge mounting plate solution that matches Salice Series F and Series B hinges also supports future service, because the same plate specification can be referenced later using the manufacturer part number BAVGEC9F/16.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Jobs

This Salice America clip-on cam adjustable wing mounting plate gives you a 12mm, die-cast steel, nickel-plated base that matches all Salice Series F and Series B hinges, so one part number supports multiple hinge choices. Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam and height adjustment of plus or minus 2 mm by slotted holes provide practical tuning range at the cabinet, which can streamline install time and post-install adjustments. The standard 37 mm x 32 mm positioning and pre-mounted Euro screws fit directly into system hole construction, supporting efficient production or jobsite work. For projects built around Salice hinges, this hinge mounting plate aligns with common layouts, adjustment needs, and cabinet environments.