Domi snap-on hinge mounting plate from Salice America is a die-cast steel hinge mounting plate designed to work with Salice hinges in cabinet projects where an economical clip-on plate is needed. The plate is compatible with all Salice hinges Series F and Series B, so it supports consistent hardware choices across a run of cabinets. Its 3mm height sets a known baseline for overlay and reveal planning when used with the matching Salice hinge arms. The plate uses Euro screw attachment, aligning with standard 32 mm system cabinet construction. Nickel plated, corrosion-resistant construction keeps the plate performing in typical cabinet environments where moisture and handling can affect exposed hardware surfaces. As a hinge mounting plate, it forms the fixed reference between the cabinet and the hinge arm, making its material, adjustability, and attachment style important for repeatable door alignment.
The plate provides depth adjustment of -0.5 mm to +2.8 mm through an eccentric cam, allowing the hinge arm to shift in and out relative to the cabinet front. This cam-based movement helps bring doors flush when the case or door is slightly out of plane. Height adjustment of plus or minus 2 mm through slotted holes lets the plate move up or down on the cabinet side, which helps align door tops and bottoms across multiple openings. The Euro screw attachment method connects the die-cast steel plate directly into system holes, providing a solid mounting point that ties hinge performance to the cabinet structure.
This hinge mounting plate is designed as an economical clip on plate for Salice hinges, which makes it a practical option in kitchen, bath, or casework projects built around Salice Series F or Series B hinges. The 37 mm x 32 mm positioning is specified for mounting, so it aligns with standard drilling patterns used in 32 mm system cabinetry. As a hinge mounting plate in the Hinges and Hinge Base Plates category, it sits on the cabinet side or face frame where the hinge arm connects, providing the structural anchor point for swing and hold positions. The die-cast steel body supports the loads placed on the hinge system while doors are opened and closed in normal use.
The 3mm height and Euro screw attachment work together as part of the hinge stack-up, defining how the hinge arm sits relative to the cabinet surface. In use, this predictable geometry supports consistent reveals when the same hinge and plate combination is repeated across a bank of doors. Nickel plated, corrosion-resistant finish keeps the contact surfaces between hinge arm and plate in better condition over time, which supports repeatable clip-on and clip-off action. Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam and height adjustment of plus or minus 2 mm by slotted holes provide installers with fine-tuning in two key directions, helping reduce rework when cabinets or walls are slightly out of true.
This hinge mounting plate is compatible with all Salice hinges Series F and Series B, so it supports those specific hinge families across a project.
The depth adjustment of -0.5 mm to +2.8 mm by eccentric cam lets installers move the door in or out to align faces when cabinetry or doors vary slightly.
The hinge mounting plate offers height adjustment of plus or minus 2 mm through slotted holes, helping align door tops and bottoms along a run of cabinets.
The 3mm height sets a known mounting thickness, which installers can use with Salice system data to plan overlays and reveals consistently.
Euro screw attachment lets the plate mount into 32 mm system holes, supporting precise spacing and faster layout in system-based cabinetry.
The nickel plated, corrosion-resistant finish helps the die-cast steel plate resist wear in typical cabinet environments, supporting long-term hinge operation.
This Salice America Domi snap-on hinge mounting plate combines 3mm height, Euro screw attachment, and single cam depth adjustment in one die-cast steel body. When your layout is based on Salice Series F or Series B hinges, this economical clip on plate offers defined geometry and two-way adjustment that support consistent door alignment across cabinets. Choose it where 37 mm x 32 mm positioning, nickel plated, corrosion-resistant construction, and system-based mounting fit your cabinet design and installation workflow.
Sold In: 1 Each