Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The GSlide G-Slide Series 22 inch push-to-open ball bearing drawer slide is a full-extension, side-mount slide rated 100 lb per pair, built for drawers where a clean, hardware-free front is the design goal. Press the closed front and the mechanical push-to-open mechanism ejects the drawer — no pull, no knob, no visible hardware required.
Push-to-open is the right choice when the design calls for slab fronts, integrated panel fronts, or any drawer face where hardware would break the visual line. Modern kitchens, handleless furniture runs, and built-in cabinetry with a flush, furniture-grade look all benefit from the mechanical touch-eject. Because this is a plain mechanical push-to-open mechanism, it replaces a closing feature — the spring eject is what keeps the drawer engaged when closed. Plan the front gap to the slide manufacturer's specification to get reliable ejection travel.
At 22 inches, this slide suits mid-depth cabinet runs: base cabinet drawers in the 20 to 22 inch depth range are the common application. Full extension means everything inside the box is reachable when the drawer is open, which matters more in kitchen base drawers than anywhere else.
Steel members with a zinc electroplate finish are the segment standard for side-mount ball bearing slides, and for good reason: the zinc layer protects against the humidity and temperature cycling of a working kitchen or shop interior over years of daily use. This is a functional finish on hardware that sits beside the open drawer box — it is not a decorative or stainless finish, and it is not rated for wet or exterior environments. For indoor cabinet work it is the right call.
Cabinet shops building handleless kitchen programs will find the G-Slide push-to-open format a practical fit alongside integrated front systems. Designers specifying a frameless modern kitchen will appreciate that the mechanical mechanism adds no visible hardware. Contractors replacing slides in an existing handleless run can match the 22 inch length and 1/2 inch clearance to the current box dimensions without rebuilding. Homeowners retrofitting a single drawer for a cleaner look will find the non-handed design straightforward to install — both slides in the pair are identical, so there is no left-right confusion at the bench. For face-frame cabinets, rear mounting support will be needed at the back of the slide; those brackets are sold separately and are series-specific.
No. This is a plain mechanical push-to-open slide. The spring ejection mechanism occupies the role a closing feature would otherwise play — the two functions conflict on a basic mechanical version. If you need both push-to-open and a damped close in one unit, look for a combined push-to-open soft-close system rather than this slide.
The push-to-open spring mechanism holds the drawer in the closed position until a light press releases it. The spring tension is what keeps the front flush and the drawer shut between uses.
Full extension means the drawer member travels approximately the full slide length, bringing the entire drawer box out past the cabinet face. The 22 inches is the closed slide length — it is not the travel distance, but on a full-extension slide the travel is close to that length so everything inside the drawer is accessible.
No. The G-Slide design is non-handed, so both slides in a pair are identical. One part number covers both sides of the drawer.
Side-mount ball bearing slides installed in face-frame cabinets need rear mounting brackets to support the back end of the slide, because the cabinet side is set back from the face frame. Those brackets are not included and are series-specific — order the matching rear brackets for the G-Slide series to complete a face-frame installation.
A 22 inch push-to-open ball bearing drawer slide at 100 lb per pair gives handleless cabinet projects a reliable mechanical ejection system with full-extension access and a straightforward side-mount installation — no pulls to spec, no hardware to finish-match, just a flush front that opens on a press.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
