Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The GSlide G-Slide 26 inch push-to-open ball bearing drawer slide is a full-extension, side-mount slide rated 100 lb per pair, designed to work with handle-less drawer fronts where a mechanical touch-release mechanism replaces the pull.
Push-to-open slides solve a specific problem: a cabinet door or drawer front with no room for hardware, or a design that calls for a completely clean face. Press the front, the spring mechanism ejects the drawer, and the ball bearings carry it out to full extension. This is a plain mechanical push-to-open unit — the spring takes the place of a closing feature, so the drawer stays where it is left once opened. There is no damper and no self-closing ramp. If the design calls for soft-close alongside a touch-release front, a combined push-to-open and soft-close unit is the correct choice for that application; this slide does not provide both.
The slide is built from steel members with a zinc finish, the working standard for side-mount ball bearing slides in cabinetry and furniture. Zinc protects the steel through years of indoor service. This is a functional, hidden finish — visible beside the open drawer box, but not a decorative element. For an all-black interior, check the finish variants in this family; this SKU ships in zinc.
Cabinet shops building slab-front or integrated-handle kitchens reach for push-to-open slides when the design requires no visible hardware on the drawer front. Designers specifying minimalist interiors use them on islands, vanities, and media units where a clean face is the point. At 26 inches, this slide suits deep kitchen base drawers, wardrobe pull-outs, and under-counter storage where a full-depth box needs full extension. The non-handed format means one part number covers every position in a run of drawers, and the 100 lb rating is sufficient for most residential and light commercial drawer loads.
No. This is a plain mechanical push-to-open slide. The spring mechanism ejects the drawer when pressed; once open, the drawer rides free on the ball bearings with no damper or closing ramp. If soft-close is required alongside a touch-release front, select a combined push-to-open soft-close unit.
Side clearance is 1/2 inch per side, so the drawer box is built 1 inch narrower than the cabinet opening. The G-Slide series is a standard side-mount design; confirm maximum recommended drawer width with the series specification if your box is unusually wide.
No. 26 inches is the closed length of the slide. Because the slide is full extension, the drawer travels approximately the full slide length, bringing the entire box out to the cabinet face — but slide length and drawer travel are two separate specs.
Side-mount slides need support at the rear in face-frame construction. Add the appropriate series-matched rear mounting brackets, sold separately, to support the back of the slide when the cabinet has a face frame.
No. The G-Slide design is non-handed, so both slides in the pair are identical. Order the quantity that matches your drawer count.
When the design calls for no visible hardware on the drawer face, the GSlide G-Slide push-to-open delivers the mechanism, the load rating, and the full extension to make it work — in a standard side-mount format that fits the way most shops already build.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
