Liberty Southampton 3 inch pull satin nickel

Liberty Southampton 3 Inch Pull For Cabinets

Liberty Southampton 3 inch pull is a zinc die cast handle from the Southampton collection that gives a consistent grip point for cabinet doors and drawers, which helps installers line up hardware visually across a run. The 3 inch (76 mm) center to center drilling matches a common layout, so it fits standard boring patterns on many face-frame and frameless cabinet designs. The satin nickel finish provides a muted metallic look that works in a wide range of projects where a brushed appearance is preferred. The pull body measures 3-3/4 inches in overall length, so it spans past the hole pattern for better hand clearance while keeping a compact footprint on narrow drawer fronts. A 1-1/8 inch projection sets the hand away from the door surface, which gives comfortable finger room during use and helps reduce knuckle contact with finished panels. The 3/4 inch width offers a solid feel without crowding tight rail spaces.

Key Liberty Satin Nickel Cabinet Pull Details

• The 3 inch center to center dimension sets precise hole spacing, which lets installers drill repeatable patterns on multiple fronts and maintain consistent alignment across a kitchen or bank of cabinets.
• The 3-3/4 inch overall length extends slightly past the mounting points, which provides more finger contact area while still fitting shorter drawer fronts and narrow stile applications.
• The satin nickel finish delivers a soft metallic appearance that coordinates easily with many hinge and appliance finishes, simplifying hardware selection on mixed-brand projects.
• The zinc die cast material gives the pull a solid metal construction, which supports everyday opening and closing of doors and drawers in residential woodworking installations.
• The 1-1/8 inch projection sets the grip away from the face of the cabinet, which gives users comfortable finger clearance without the pull sticking excessively far into walk paths.
• The 3/4 inch width keeps the pull slim enough for tight rail areas, while still presenting a visible target for the hand on wider drawer and door fronts.

Mounting Dimensions That Support Straight Installs

The 3 inch center to center drilling on this P20383-SN-C cabinet pull sets a clear mounting reference, which helps tradespeople lay out straight runs using jigs or story sticks. At 3-3/4 inches overall length, the handle leaves a small margin beyond the screw line, which helps cover minor drilling variances while still appearing balanced on mid-size drawers. The 1-1/8 inch projection creates a fixed stand-off from the cabinet face, which stabilizes the feel of the handle and reduces contact with the door surface over time. With a 3/4 inch width, the pull fits on narrow rails where space is limited, which is useful on smaller bath vanities or accent cabinets that still need a full three-inch hole pattern.

How This Southampton Collection Pull Works In Projects

Where This Satin Nickel Cabinet Pull Fits Best

This satin nickel Southampton collection pull is designed for use on cabinet doors and drawers where a 3 inch center to center pattern is specified, which suits many kitchen, bath, and built-in woodworking layouts using that standard spacing. The zinc die cast construction supports everyday operation in residential environments, so it works well on frequently used fronts like sink bases and main drawer stacks. Because the overall length is 3-3/4 inches, the pull suits medium-width drawer fronts where larger bars might overpower the design, giving installers a proportional option that still offers full hand contact. The 3/4 inch width lets this handle sit cleanly on slimmer rails, supporting layouts on narrow doors or utility cabinets without crowding surrounding profiles or trim details.

Details That Help With Consistent Cabinet Results

The defined 3 inch (76 mm) center to center spacing on this 3 inch center to center pull supports use with common drilling templates, which reduces layout time and helps keep hardware lines level from cabinet to cabinet. The 1-1/8 inch projection sets a repeatable distance off the face, which aids in achieving the same reach feel whether the pull is mounted on doors or drawers within the same project. The satin nickel finish gives a uniform surface appearance, which helps maintain a cohesive look when multiple pulls are used across a room. The 3-3/4 inch cabinet pull length leaves enough bar extending past the screw locations for users to grab from different angles, which can be useful on wider drawers that see varied hand positions. The 3/4 inch width keeps the pull profile compact, which helps maintain clearance between adjacent fronts on tight reveals while still presenting a clear handle edge to the user.

Common Questions About This Liberty Cabinet Pull

Select This Pull For 3 Inch Cabinet Layouts

The Liberty satin nickel cabinet pull P20383-SN-C offers a 3 inch center to center layout, which suits projects built around that standard drilling pattern. Its 3-3/4 inch length, 1-1/8 inch projection, and 3/4 inch width give clear dimensional guidelines for planning door and drawer fronts. The satin nickel zinc die cast construction provides a stable, metal pull option within the Southampton collection when a consistent finish and defined hand clearance are needed across multiple cabinets.