
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Drawer slide spacer 2-3/16 inch describes this Bainbridge Manufacturing spacer that provides a fixed 2-3/16 inch depth, so you can offset drawer slides to clear cabinet face frames. This depth sets a consistent stand-off from the cabinet side, which helps keep drawer members aligned when the cabinet has a protruding face frame. The spacer is described as being for use with any drawer slides, so it supports a wide range of drawer slide styles in the shop. That flexibility lets you standardize on one spacer profile across different slide lines while maintaining the same clearance behind the face frame. The almond color offers a neutral appearance, which blends with many light cabinet interiors where the spacer may be visible at the case side. The part is identified as Bainbridge Manufacturing 3613AL-22, so you can match it precisely to plans or past work.
This Bainbridge drawer slide spacer uses two cabinet mounting holes spaced 32 mm apart, so it fits directly into a 32 mm cabinet system layout when drilling case sides. Using those pre-established hole centers, you can fasten the spacer to the cabinet without separate measuring for vertical spacing. The spacer also has one center Euro screw location to mount the drawer slide to the spacer, giving you a single, repeatable fastening point between slide and spacer. Because the depth is 2-3/16 inch, the slide is held that distance away from the cabinet side, which positions the drawer member correctly so it can run past the cabinet face frame.
This almond drawer slide spacer is described as used to clear face frames, so it is suited to cabinets where the front frame projects into the opening. In those situations, the 2-3/16 inch depth moves the drawer slide inward from the cabinet side to align with the drawer box. Because it is for use with any drawer slides, it can be applied with different slide types in these framed cabinets while holding the same stand-off dimension. That consistency helps when setting up a run of cabinets where several drawer openings share the same face frame projection. The almond finish works well inside light-colored cabinets, so the spacer sits behind the slide without drawing attention.
The spacer has two cabinet mounting holes spaced 32 mm apart, which aligns with a 32 mm cabinet drilling grid to keep mounting locations repeatable from cabinet to cabinet. With those fixed hole centers, you can position the spacer quickly using standard system rows, which helps maintain level drawer slide runs. The single center Euro screw mounting point ties the drawer slide solidly to the spacer, so the slide sits at a defined height and depth relative to the cabinet side. Because the spacer depth is 2-3/16 inch, every slide fastened to this part will share the same offset from the cabinet wall, which supports uniform drawer reveal and travel when clearing face frames across a project.
This drawer slide spacer has a 2-3/16 inch depth, which sets the drawer slide that distance off the cabinet side to clear face frames and keep drawer movement aligned with the opening.
The spacer uses two cabinet mounting holes spaced 32 mm apart, so it attaches at those fixed points, matching a 32 mm drilling pattern for consistent vertical placement in the case.
The spacer has one center Euro screw location for mounting the drawer slide, which provides a direct fastening point and sets the slide at a repeatable position on the spacer.
The spacer is described for use with any drawer slides, so it supports multiple drawer slide types while keeping the same 2-3/16 inch offset from the cabinet side.
The spacer is used to clear face frames, so it is intended for framed cabinets where the front frame projects into the opening and requires the slide to be offset inward.
The Bainbridge Manufacturing 3613AL-22 spacer is almond, which provides a light, neutral tone suited to many cabinet interiors around the mounted drawer slides.
The Bainbridge Manufacturing 3613AL-22 drawer slide spacer combines a 2-3/16 inch depth with mounting aimed at a 32 mm pattern, so it supports efficient, repeatable drawer slide placement in framed cabinets. Using the two cabinet mounting holes spaced 32 mm apart, you can position the spacer wherever the system holes land in your case design while maintaining consistent alignment. The center Euro screw mounting point connects your chosen drawer slide directly to the spacer, tying slide and cabinet offset together in one part. With its almond finish and for use with any drawer slides description, this spacer suits a wide range of cabinet interiors and slide lines when you need a dependable offset to clear face frames.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | PL3613WH Mfr# 3613WH-22 | Drawer Slide Spacers Heavy-Duty Nylon Brackets, Rectangular 2-3/16", White |