Berenson Advantage Plus One Series 3" (76 mm) Center to Center Weathered Nickel Pull, - 9343-10WN-P

Berenson Advantage Plus One Pull For Cabinets

Berenson Advantage Plus One pull is a zinc die cast cabinet handle that uses a 3 inch center to center mounting, so it lines up with standard drilled holes on many cabinet doors and drawers. The pull has a total length of 4-5/16 inch, giving fingers a defined gripping area while staying compact on smaller fronts. Its weathered nickel finish presents a muted metal look that suits traditional and transitional cabinet styles. The projection is 15/16 inch, which spaces the hand away from the door surface to help reduce finger marks around the hardware. A base size of 9/16 inch and a 7/16 inch width create a slim profile that sits neatly on face frames or slab fronts without looking bulky. The pull is part of the Advantage Plus collection, allowing consistent visual alignment where the same series is used across a run of cabinets.

Key Details That Support Cabinet Hardware Jobs

• The 3 inch center to center measurement matches one of the most common drilling patterns, so this pull can serve straightforward cabinet updates where existing 3 inch hole spacing is already present.
• The 4-5/16 inch overall length provides a comfortable gripping span, which helps when opening heavier drawers or tall doors without crowding neighboring hardware locations.
• The 15/16 inch projection sets the pull off the surface enough for a full finger wrap, improving day-to-day operation while limiting knuckle contact with the cabinet face.
• The 7/16 inch width and 9/16 inch base keep the pull visually light, which works well on narrow rails, small doors, or tight drawer layouts where larger hardware could overpower the design.
• The zinc die cast construction delivers a solid metal feel at the hand, which supports repeat use on frequently opened cabinets in kitchens, baths, or shop storage runs.
• The weathered nickel finish presents a subtly aged appearance, helping the pull blend into existing weathered nickel decorative hardware where a coordinated look is desired.

Installation Dimensions For Straightforward Mounting

The 3 inch center to center dimension defines the hole spacing for this Berenson 9343-10WN-P pull, so it aligns with cabinet fronts already drilled at 3 inches on center. With an overall length of 4-5/16 inch, the pull extends past the mounting points just enough to clear adjacent moldings or door edges on most standard layouts. The 15/16 inch projection governs how far the pull stands off the door or drawer face, which matters when working near face frame edges or appliance panels. A base size of 9/16 inch offers enough footprint around each fastener point for visual coverage of typical drill points while keeping the contact area compact on narrow stiles. The 7/16 inch width contributes to a balanced front view, helping installers align multiple pulls in a straight visual line across banks of drawers.

Using This Weathered Nickel Pull In Real Projects

Where This Advantage Plus Pull Works Best

This Berenson Advantage Plus One pull fits cabinet projects that call for a 3 inch center to center layout, such as many framed and frameless kitchen or bath runs. The 4-5/16 inch overall length makes it suitable for both doors and medium-width drawers, so a single pull style can carry across upper and lower cabinets. Its weathered nickel finish supports design schemes that favor softer metal tones, which works well with painted, stained, or laminated fronts using similar muted hardware colors. The zinc die cast material suits residential cabinetry and general storage cabinets where metal pulls see regular daily use. Because the pull belongs to the Advantage Plus collection, it can be used alongside other items from the same collection to maintain a steady look from one cabinet elevation to the next.

Details That Help Repeatable Cabinet Hardware Results

The defined 3 inch center to center mounting on this 3 inch center to center pull supports consistent drilling layouts, so rows of pulls align visually across multiple doors and drawers. The 15/16 inch projection keeps the hand away from the cabinet surface during operation, which can reduce finish wear immediately behind the hardware in busy kitchen zones. A 7/16 inch width combined with a 9/16 inch base guides installers when laying out hardware on narrow rails, since the pull stays clear of edge profiles while still giving a stable bearing surface. The 4-5/16 inch total length provides a repeatable reference when aligning pulls to panel features or drawer heights across a bank, aiding in clean, level hardware lines. The weathered nickel finish, shared across the Advantage Plus collection pull family, helps maintain finish consistency on replacements or additions, so new hardware visually matches existing weathered nickel pieces in the same area.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 3 Inch Cabinet Layouts

The Berenson Advantage Plus One Series 3 inch center to center pull, model 9343-10WN-P, combines zinc die cast construction, a 4-5/16 inch overall length, and 15/16 inch projection for dependable cabinet handling. Its weathered nickel finish and slim 7/16 inch width give a controlled, traditional look across kitchen, bath, or storage cabinets using 3 inch drilled layouts.