Berenson ZZ Series 3" (76 mm) Center to Center Brushed Nickel Pull, - 1744-1BPN-P
Description
Berenson Advantage Two Pull For Cabinets
Berenson Advantage Two pull gives a 3 inch center to center handle in a brushed nickel finish for cabinet and drawer fronts. The pull is part of the Advantage Two Collection in the Traditional style, so it matches projects calling for a classic look. Its zinc material forms a sturdy handle body, which supports repeated daily use on frequently opened fronts. The brushed nickel finish diffuses light along the surface, helping the pull read as a softer metallic tone on installed doors and drawers. A length of 5-3/4 inches spans wider than the 3 inch center to center, creating comfortable gripping edges at each side. Projection of 7/8 inch sets the handle out from the face, which creates clearance for fingers during normal operation.
Key Advantage Two Pull Details For Projects
- The 3 inch center to center drilling matches layouts built around this common size, which simplifies planning hole locations across multiple cabinet and drawer fronts on a run.
- An overall length of 5-3/4 inches gives more hand contact area than the drilling alone, helping users grasp from different angles across varied cabinet widths.
- The 7/8 inch projection spaces the handle away from the surface, so fingers can wrap behind the pull without rubbing directly along the door or drawer face.
- A width of 5/8 inch provides a narrow but defined gripping edge, which can aid in consistent hand placement on smaller fronts or tight bank layouts.
- Hand clearance of 43/64 inch describes the open space behind the pull, which guides installers when checking that typical fingers fit comfortably between handle and cabinet face.
Pull Mounting And Fit Details On Cabinets
The 3 inch center to center measurement defines the distance between mounting holes, which sets drilling positions on cabinet or drawer faces before installation. Base diameter of 5/8 inch marks the footprint at each end, allowing planning around rail widths or stile faces where the pull will sit. The 8-32 x 1 inch screw size specification ties the handle to standard cabinet mounting threads, supporting straightforward fastening into typical door and drawer materials. Zinc construction keeps the handle as a single material body, which helps the mounting points and grip surface behave consistently under normal operation. Traditional style language in the description connects this pull with projects targeting more classic cabinet profiles.
Using This Brushed Nickel Pull In Workflows
Where This 3 Inch Center Pull Fits Best
This Berenson 1744-1BPN-P brushed nickel pull works on cabinet and drawer fronts laid out for 3 inch center to center hardware, keeping hole spacing consistent across a room. Its 5-3/4 inch overall length suits doors where a modestly longer handle still aligns with traditional fronts. The 43/64 inch hand clearance dimension shows the open space behind the pull, guiding selection for users who want room for typical adult fingers during daily operation. Zinc material ties this handle to decorative hardware projects using metal pulls, which aligns with the Decorative Hardware & Moldings category listing. The brushed nickel finish coordinates with other brushed nickel items on the same run, supporting visual continuity on multi-cabinet installations.
Why These Advantage Two Details Support Results
The Advantage Two Series identity groups this pull with other Value and Traditional pieces, which supports consistent styling when multiple handles are installed in one project. The 5/8 inch width offers a defined edge along the grip, helping hands find a repeatable pull point on smaller drawers. A projection of 7/8 inch positions the grip away from raised profiles or molding details, helping avoid knuckles striking the cabinet face during use. The 5/8 inch base diameter at each end keeps the footprint compact, which can help when aligning the pull on narrow rails or tight stile areas. The specified 8-32 x 1 inch screw size pairs the handle with a familiar cabinet fastener standard, streamlining installation across a run of doors and drawers built for that thread.
Common Questions About This Berenson Cabinet Pull
What is the drilling size for this Berenson Advantage Two pull?
This Berenson Advantage Two pull has a 3 inch center to center measurement, so hole spacing on cabinet or drawer fronts follows that 3 inch layout for consistent alignment.
How long is the 1744-1BPN-P brushed nickel pull overall?
The 1744-1BPN-P brushed nickel pull measures 5-3/4 inches in overall length, which provides more gripping area while still matching a 3 inch center to center drilling pattern.
What projection and clearance does this traditional brushed nickel pull provide?
This traditional brushed nickel pull has a 7/8 inch projection and 43/64 inch hand clearance, setting the grip off the surface so fingers fit behind the handle during normal use.
What material is the Berenson 3 inch cabinet pull made from?
The Berenson 3 inch cabinet pull is made of zinc, creating a metal handle body suited to decorative hardware projects using zinc construction.
What style and finish does this Advantage Two Series cabinet pull have?
This Advantage Two Series cabinet pull is described as Traditional style with a brushed nickel finish, aligning it with classic cabinet fronts using brushed nickel hardware.
Which screw size works with this Berenson 1744-1BPN-P handle?
The Berenson 1744-1BPN-P handle uses 8-32 x 1 inch screws, tying it to a standard cabinet mounting thread length for fastening into door and drawer fronts.
Select This Pull For Traditional Nickel Projects
The Berenson Advantage Two pull combines a 3 inch center to center layout, 5-3/4 inch length, and brushed nickel finish for Traditional style cabinet work. Zinc construction, defined 5/8 inch width, and 7/8 inch projection support everyday gripping on doors and drawers. The specified 8-32 x 1 inch screw size and 5/8 inch base diameter anchor the handle on typical cabinet faces. For projects built around brushed nickel decorative hardware within the Advantage Two line, this 1744-1BPN-P pull offers a matched handle option.
