Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Kreg #6 x 1-inch Modified Pan Head Face Frame and Pocket-Hole Screw is a fine-thread, square-drive fastener designed for joining hardwood face frame members and attaching face frames to cabinet boxes. At 1 inch, this length is the standard match for 3/4-inch hardwood stock in pocket-hole joinery, pulling rail-to-stile and face-frame-to-box joints tight without over-penetrating the material.
Face-frame joinery in 3/4-inch hardwood stock is exactly the application this 1-inch length is built for. Driven at the standard 15-degree pocket angle, the screw draws through the pocket and threads into the mating piece with enough engagement to pull the joint tight and hold it flat. Use it rail-to-stile when building the frame on the bench, or to attach a completed face frame to the front of a cabinet box. It also handles edge-to-face connections in solid-wood furniture joinery where the combined stock is in the 3/4-inch range. For thicker stock or two-piece butt joints, other lengths in the SPS-F1 family cover those scenarios.
The fine thread is the right choice for hardwood. Coarse-thread screws can strip in dense maple or oak before the joint fully closes; fine threads bite gradually and build clamping force without the risk. The modified pan head is flat-bottomed and broad enough to bear against the pocket surface without any wedging action at the edges, keeping clamping force even across the joint. The Type 17 auger point has a small longitudinal flute that cuts a channel through wood fibers rather than simply pushing them aside. That reduces the torque spike you often feel in hard maple near the end of a drive, and it lowers the chance of surface cracking on delicate species.
Cabinet shops building hardwood face frames are the primary buyer. If the shop runs maple, oak, cherry, or walnut frames and uses pocket-hole joinery, this is the screw that belongs in the driver. Finish carpenters and installers who attach pre-built face frames to site-built or shop-built cabinet boxes will also find the 1-inch length covers most of their face-frame attachment work. For homeowners tackling a kitchen renovation with a pocket-hole jig, a box of 100 is the right scale: enough to complete a full run of upper or base cabinets without over-buying.
Fine threads have more threads per inch than coarse threads, which gives them more surface contact in dense wood. In hard maple, oak, or cherry, a coarse thread can strip the hole before the joint fully closes. Fine threads build clamping force progressively and hold without stripping.
This screw is optimized for hardwood. For softwood species like pine or poplar, or for plywood and MDF face frames, a coarse-thread pocket-hole screw will give better pull-out resistance in those lower-density materials. Kreg offers coarse-thread variants in the same family for those applications.
Set the jig for 3/4-inch material thickness. That aligns the pocket angle and depth so the 1-inch screw exits into the center of the mating piece and produces a flush, tight joint.
The square recess is designed to hold the screw on a correctly sized #2 square bit for one-handed placement. The fit depends on using a properly sized bit; an oversized or worn bit will reduce that retention.
No. The zinc finish is rated for dry interior use. For exterior work or pressure-treated lumber, choose a screw with a corrosion-resistant coating rated for those conditions.
When the thread, length, head, and point all match the material and joint, the face frame comes together without splitting, stripping, or rework. That is what the Kreg SPS-F1 in the 1-inch length is engineered to deliver in hardwood cabinet joinery.
Sold In: 1 Box