Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Kreg SPS-F150 is a #6 x 1-1/2 inch face frame and pocket-hole screw designed for joining 3/4-inch hardwood face frame stock. Fine thread, a modified pan head, and a Type 17 auger point work together to pull tight joints without splitting maple, oak, cherry, or similar hardwoods.
At 1-1/2 inches, this screw is sized for the most common face frame joint: two pieces of 3/4-inch hardwood joined rail-to-stile or frame-to-cabinet-box. The length provides enough thread engagement to pull the joint tight without breaking through the back face of the second member. Shops building face frames from maple, oak, walnut, or cherry will find this length covers the majority of their standard joinery work. It also suits attaching a completed face frame to a 3/4-inch cabinet side when you need a clean, hidden connection.
Coarse-thread screws grip well in softwood and sheet goods but can split tight-grained hardwoods and strip out under torque. The fine thread on this screw engages hardwood fibers more evenly and holds firmly without requiring excessive driving force. The modified pan head complements that: its flat, broad underside bears against the pocket wall and draws the joint closed without acting as a wedge. That combination is why fine-thread, pan-head screws are the standard specification for hardwood face frame assembly.
Cabinet shops building face frames from hardwood species use this screw for rail-to-stile connections driven through pocket holes cut with a standard pocket-hole jig. It also works for attaching a completed face frame to the cabinet box or joining adjacent installed cabinets at their stiles when access allows a pocket-hole approach. The 100-piece box suits small-batch and custom shops that work across multiple species and want a dedicated fine-thread screw on hand for hardwood days without committing to a large quantity.
Fine thread is the correct choice for hardwood species like maple, oak, cherry, and walnut. Coarse threads grip well in softwood and engineered panels but can split dense, tight-grained hardwood during driving. Fine thread engages more evenly and pulls the joint without cracking the stile.
Yes. For two pieces of 3/4-inch hardwood joined in a pocket-hole configuration, 1-1/2 inches is the standard length. It provides enough thread engagement to close the joint firmly without penetrating the back face of the second workpiece.
The Type 17 auger point has a fluted tip that cuts and removes wood fibers as the screw enters rather than displacing them. In dense hardwoods, this reduces the radial pressure that causes splitting and lowers the torque needed to drive the screw fully home.
It will work mechanically, but for softwood, pine, or plywood face frames the coarse-thread version of this screw provides better pull-out resistance. Fine thread is optimized for hardwood; coarse thread is the better choice in softer or lower-density materials.
No. The modified pan head is designed to seat against the flat face of the pocket bore without a countersink. The pocket-hole jig creates the angled pocket geometry that positions the head correctly when the screw is driven.
For shops building hardwood face frames that need to close tight and stay that way, the Kreg SPS-F150 in 1-1/2 inch puts the right thread, head, and point at the joint where it matters most.
Sold In: 1 Box