Berenson Edge 3-3/4" (96 mm) Center to Center Brushed Nickel Pull, 9272-1BPN-C

Berenson Edge Series 96mm Pull For Cabinets

Berenson Edge Series 96mm pull is a zinc die cast cabinet handle in a brushed nickel finish, so it gives cabinetry a clean metallic look backed by a solid metal body. The 3-3/4 inch (96 mm) center to center mounting spreads the load across the door or drawer front, which helps the pull feel stable when opened repeatedly. Its overall 4-7/8 inch length adds extra grip area, giving fingers more contact for comfortable operation. The 1-3/16 inch projection stands the pull off the surface enough for an easy handhold, supporting smooth opening even on heavier fronts. A slim 5/16 inch width keeps the profile narrow, which suits modern, streamlined cabinet layouts. Base dimensions of 13/16 inch at each end define the footprint on the surface, which helps with layout spacing across multiple doors and drawers.

Key Edge Series Pull Details For Cabinet Work

• The zinc die cast material creates a rigid pull body, which helps it feel solid under hand when doors or drawers are opened many times a day.
• The brushed nickel finish softens reflections, which helps this pull blend with other nickel-toned hinges and hardware on the same run of cabinets.
• The 3-3/4 inch (96 mm) center to center size matches a common drilling pattern, which simplifies layout when positioning multiple pulls on cabinet doors or drawer fronts.
• The 4-7/8 inch overall length provides extra gripping span, which supports comfortable use on wider drawers or doors that need a firmer pull.
• The 1-3/16 inch projection spaces the handle off the face of the cabinet, which gives fingers clearance for a full grip without rubbing the door or drawer surface.
• The 5/16 inch width and 13/16 inch base dimensions create a compact footprint, which helps maintain a clean, linear look along cabinet faces.

Mounting Dimension Details For This Cabinet Pull

This Berenson Edge Series cabinet pull uses a 3-3/4 inch (96 mm) center to center measurement, so hole locations are defined by that fixed spacing when drilling fronts. The 4-7/8 inch overall length extends slightly beyond the mounting centers at each end, which helps visually balance the pull on typical drawer widths. A 1-3/16 inch projection sets the grip away from the cabinet face, giving room for fingers while still keeping the pull close enough to avoid catching on clothing. The 5/16 inch width forms a narrow bar, which pairs well with contemporary flat-panel doors. With 13/16 inch base dimensions at each mounting point, the bearing area against the cabinet face is clearly defined, which supports consistent alignment from piece to piece.

How This Brushed Nickel Pull Fits Cabinet Projects

Where The Brushed Nickel Edge Pull Works Best

This Edge Series brushed nickel pull is part of the handles and pulls category, so it is intended for use on cabinet doors and drawers in woodworking and cabinetmaking projects. The 3-3/4 inch (96 mm) center to center sizing matches a widely used spacing, which suits new cabinet builds that follow standard drilling patterns. Its 4-7/8 inch length provides proportion on typical base and wall cabinet doors, helping the pull sit visually centered across stiles or drawer fronts. The brushed nickel finish coordinates with other brushed nickel decorative hardware and moldings, which supports a consistent appearance along runs of cabinetry. Zinc die cast construction keeps the handle structure uniform from piece to piece, which is helpful when multiple pulls are used in a kitchen or shop installation.

Details That Support Repeatable Alignment And Operation

The fixed 3-3/4 inch (96 mm) center to center dimension on this Berenson 9272-1BPN-C pull allows templates or jigs to be set up once, which helps speed repetitive drilling across doors and drawers. Its 13/16 inch base dimensions define the seating area at each end, which helps installers read edge clearances and keep pulls straight relative to door edges. The 1-3/16 inch projection creates a consistent stand-off from the cabinet face, supporting smooth hand clearance across an entire run of hardware. A slim 5/16 inch width keeps the pull visually light, which can reduce visual clutter when many pulls are lined up on banks of drawers. The brushed nickel finish on the zinc die cast body maintains the same surface character from pull to pull, which helps projects look uniform once all hardware is mounted.

Common Questions About This Berenson Cabinet Pull

Selecting This 96mm Pull For Cabinet Projects

The Berenson Edge Series 3-3/4 inch (96 mm) center to center brushed nickel pull combines zinc die cast construction with defined dimensions, giving cabinet projects a consistent, repeatable hardware choice. Its 4-7/8 inch overall length, 1-3/16 inch projection, and 5/16 inch width set a clear profile that fits modern cabinet lines. By matching the 96 mm center to center drilling used on many cabinetry runs, this pull aligns with standard layouts, which supports straightforward installation across multiple doors and drawers.