Berenson Edge 3-3/4" (96 mm) Center to Center Dull Chrome Pull, 9274-10DC-C

Berenson Edge Series Pull For Cabinet Projects

Berenson Edge Series pull gives cabinets a clean, modern grip that fits common 3-3/4 inch center to center layouts, so it works naturally with many standard drilling patterns in new builds or change-out jobs. The pull is made from zinc die cast material, which provides a solid feel in the hand and a consistent shape that stays true after repeated use. Its dull chrome finish offers a muted metallic look that suits contemporary or transitional cabinet styles where a low-glare surface is preferred. The overall length of about 4-7/8 inch creates enough hand space across typical drawer fronts without crowding narrow faces. A projection of about 1-3/16 inch stands the pull off the face of the cabinet, giving finger clearance for a positive grip on doors and drawers. The slim 5/16 inch width keeps the profile compact so lines stay tight on smaller fronts.

Key Edge Series Pull Details For Buyers

• The 3-3/4 inch (96 mm) center to center drilling matches a widely used cabinet hole spacing, which helps when aligning multiple pulls across banks of drawers or doors.
• The overall 4-7/8 inch length gives proportionate coverage on many drawer widths, helping pulls look balanced on both narrow and mid-size fronts.
• The 1-3/16 inch projection stands the pull away from the surface, providing room for fingers and helping reduce knuckle contact with the cabinet face during use.
• The slim 5/16 inch width keeps the edge profile minimal, which is useful when a lighter visual line is preferred or when space between adjacent fronts is limited.
• The dull chrome finish provides a soft metallic appearance, helping hardware blend with other brushed or low-sheen fixtures in the same space.
• The zinc die cast construction creates a uniform body, supporting consistent alignment when multiple pulls are installed in a run.

Installation Dimensions And Hole Layout Use

The 96 mm center to center dimension gives a clear drilling target when laying out holes on cabinet doors and drawer fronts, which is useful for jigs or repetitive shop setups. With an overall length of 4-7/8 inch, this pull extends slightly beyond the drilling points, creating visible ends that help visually register alignment against door edges and drawer rails. The 1-3/16 inch projection defines how far the handle stands off the face, which matters when working near face frames or adjacent appliances. A narrow 5/16 inch width allows positioning on slender drawer rails where wider bars might look oversized, and it keeps the grip feeling precise on smaller cabinet fronts.

Using This Dull Chrome Pull In Real Projects

Where The 3-3/4 Inch Pull Works Best

This 3-3/4 inch center to center pull fits projects designed around the common 96 mm drilling standard, which often appears on both stock and custom cabinetry. On cabinet doors, the 4-7/8 inch overall length spans enough of the stile to provide comfortable leverage when opening taller doors. On drawers, that same length helps pulls sit proportionally on medium-width fronts without overpowering the face. The 1-3/16 inch projection suits installations where doors need clearance from adjacent surfaces, helping the hand stay away from nearby panels. Because the width is only 5/16 inch, the pull can sit comfortably on narrow rails or tight drawer groupings, supporting dense layouts in kitchens, baths, or shop cabinets that use compact faces.

Dimensions That Support Consistent Alignment

The fixed 96 mm center to center spacing supports repeatable drilling across multiple cabinets, which is valuable when using templates or CNC layouts for batch work. Consistent overall length at 4-7/8 inch allows installers to line up pull ends visually across a run, maintaining straight sightlines across doors and drawers. The 1-3/16 inch projection sets a predictable stand-off, which helps coordinate pull depth with other hardware in the room. A 5/16 inch width keeps the pull edges tight, so reveals around drawers and doors remain the primary visual lines rather than bulky hardware. The zinc die cast construction provides a stable form, so each piece matches the next, simplifying alignment checks along long banks of cabinetry.

Common Questions About Berenson Edge Series Pull

Choose This Pull For 96 Mm Cabinet Layouts

This dull chrome Edge Series pull from Berenson Corporation brings a 96 mm center to center layout, a 4-7/8 inch overall length, and a slim 5/16 inch width to cabinet jobs where consistent dimensions matter. The zinc die cast construction and 1-3/16 inch projection support regular door and drawer use while keeping fronts looking clean. For projects built around 3-3/4 inch drilling, this pull aligns size, finish, and profile into a straightforward option for both new cabinet runs and updates to existing layouts.