Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson I-Spazio pull 192mm center to center gives you a long, continuous grip point along the face of a cabinet door or drawer, which supports confident opening on wider fronts. The zinc die cast construction creates a solid-feeling handle, which helps the pull feel stable when doors or drawers are operated repeatedly in a busy shop or home. Its brushed nickel finish presents a muted metallic surface, which helps the pull sit visually well with many common brushed nickel hinges and decorative hardware. The pull length of 10-1/4 inches places the gripping area across more of the front, which can help spread hand force and reduce stress on the mounting points. A projection of 1-1/4 inches steps the handle off the cabinet face, which leaves space for fingers to wrap behind the bar. The 1/4 inch width gives the pull a slimmer front profile, which can help keep a clean, linear look along cabinet rows.
The 192 mm center to center dimension on this Berenson I-Spazio pull establishes the exact distance between the two mounting points, which guides drilling and jig settings when preparing cabinet fronts. Because the overall pull length is 10-1/4 inches, the ends extend past the mounting holes, which affects how the handle visually lines up near door and drawer edges. The 1-1/4 inch projection tells you how far the grip stands away from the surface, which influences clearance when doors open near adjacent walls or appliances. With a slim 1/4 inch width, the pull presents a narrow contact face to the user, which can matter when aligning it with stile widths or narrow drawer fronts.
This I-Spazio Series pull from Berenson Corporation fits cabinet layouts that are already bored for a 192 mm center to center pattern, which simplifies using it as a direct swap on those fronts. The bar-style design at 10-1/4 inches long works on wider cabinet doors and drawers, where a longer handle can feel proportionate to the front size. Its brushed nickel finish aligns visually with brushed nickel decorative hardware and moldings, which supports a consistent finish choice across a kitchen, bath, or built-in project. The 1/4 inch width gives the pull a minimal, linear footprint, which suits designs that favor straight lines and understated hardware presence on the face of the cabinetry. With a projection of 1-1/4 inches, the pull offers space for fingers behind the bar, which is useful on thicker drawer fronts or doors where clearance is valued.
The defined 192 mm center to center measurement provides a precise target for drilling, which supports repeatable mounting when using jigs or line boring equipment across multiple fronts. Because the total length is 10-1/4 inches, installers can reference the bar ends when aligning hardware to door or drawer edges, which helps keep hardware consistently positioned along a bank of cabinets. The 1-1/4 inch projection figure serves as a planning dimension when hardware is near adjacent units, which can help avoid interference where doors swing or drawers pass close to nearby surfaces. The slim 1/4 inch width can also aid layout, because it allows the pull to sit comfortably on narrower rails without crowding, which is useful when hardware needs to be centered on modest stile widths. With a zinc die cast body carrying the brushed nickel finish, the pull presents a uniform surface along its length, which supports a consistent look when multiple pieces are installed side by side.
The pull has 192 mm center to center mounting, a 10-1/4 inch overall length, 1-1/4 inch projection, and 1/4 inch width, which defines its footprint on cabinet fronts.
The 192 mm center to center distance sets the hole spacing, which guides drilling patterns and jig settings when mounting the pull on cabinet doors and drawers.
The 9296-1BPN-C I-Spazio pull is zinc die cast, which provides a consistent base shape and surface for the applied brushed nickel finish.
This Berenson I-Spazio cabinet pull has a brushed nickel finish, which coordinates with other brushed nickel decorative hardware on cabinets.
The pull has a 1-1/4 inch projection, which describes how far it extends from the cabinet surface for finger clearance behind the bar.
The manufacturer part number 9296-1BPN-C identifies this specific I-Spazio Series brushed nickel pull from Berenson Corporation for ordering and matching.
The Berenson I-Spazio Series 192 mm center to center brushed nickel pull brings a 10-1/4 inch bar length, 1-1/4 inch projection, and 1/4 inch width to cabinet fronts, which supports coordinated hardware runs. For projects built around brushed nickel finishes and 192 mm boring patterns, this zinc die cast pull from Wurth Baer Supply provides a defined set of dimensions for planning layouts and repeating installations across multiple doors and drawers.
Sold In: 1 Each
