Berenson I-Spazio Series 5-1/16" (128 mm) Center to Center Dull Chrome Pull, - 9301-10DC-C

I-Spazio Pull 128mm Center To Center Use

I-Spazio pull 128mm center to center gives cabinets a modern linear grip that matches a 5-1/16 inch drilling pattern, so existing 128 mm hole spreads on doors or drawers line up without redrilling for most change-out jobs. The pull is part of the Berenson I-Spazio collection, which keeps hardware style consistent across a run of cabinets when you repeat this series. Its zinc die cast construction forms a solid, rigid handle, so the bar stays stable under everyday opening and closing. The dull chrome finish provides a muted metallic look, which can soften reflection on long banks of cabinetry under strong lighting. Overall length of 7-7/8 inches gives plenty of hand contact across wider drawer fronts, while still suiting standard cabinet door widths. With a projection of 1-1/4 inches, fingers clear the door face comfortably when pulling. A slim 1/4 inch width keeps the profile minimal, which helps hardware read as a clean line instead of a bulky element.

Key I-Spazio Pull 128mm Job Advantages

• The 5-1/16 inch (128 mm) center to center dimension aligns with a common cabinet drilling layout, which simplifies layout work and speeds up handle replacement on many existing fronts.
• The 7-7/8 inch overall length spreads visual weight across the face, which helps balance wider drawers or tall doors without needing multiple smaller pulls.
• The 1-1/4 inch projection creates hand clearance away from the cabinet surface, which helps users grab the pull comfortably even on thicker door edges.
• The 1/4 inch width keeps the pull visually light, which supports a streamlined appearance on modern slab fronts and reduces visual clutter on multi-door installations.
• The dull chrome finish offers a softer metallic sheen compared with bright chrome, which helps reduce glare under task lighting while still coordinating with chrome fixtures.
• The zinc die cast material provides a solid feel in the hand, which supports a sturdy operation when opening heavier cabinet drawers or doors.

Installing The Dull Chrome 128mm Pull

The 5-1/16 inch center to center measurement on this dull chrome pull sets the screw hole spacing, so installers can match it directly to 128 mm on-center drilling during layout. The zinc die cast body holds its shape at that span, which helps the pull sit flat against the door or drawer once tightened. Its 1-1/4 inch projection sets the standoff distance from the front, which determines how far the hand sits from the cabinet face during use. With a 1/4 inch width, the contact line at the mounting area stays narrow, which can help the pull align neatly along pencil lines or jigs for straight runs. The 7-7/8 inch overall length affects how far the pull reaches toward the cabinet edges, which can be used to line the bar with stile or rail features on framed cabinets.

Berenson I-Spazio Pull In Real Cabinet Runs

Where This Berenson I-Spazio Pull Fits Best

The I-Spazio pull with 128 mm center to center spacing works along straight rows of cabinets where that drilling pattern is already used, because the 5-1/16 inch hole spread matches a widely used standard. Its 7-7/8 inch overall length suits base cabinet drawers that need a longer handhold across the front, so users can pull from different spots without losing grip. The 1-1/4 inch projection keeps a consistent stand-off across doors and drawers, which helps when aligning hardware heights across an entire kitchen or bank of office cabinets. A slim 1/4 inch width keeps the pull from dominating narrow doors, which is useful on upper cabinets where face heights are smaller. The dull chrome finish coordinates with other chrome elements in a project, and its muted appearance blends well across multiple cabinets when repeated.

Details That Support Repeatable Hardware Results

The precise 5-1/16 inch center to center specification gives a reliable number for drilling jigs, which supports consistent handle placement when running multiple doors or drawers on site or in a shop. Because the pull body is zinc die cast, each piece holds the same shape, which helps rows of hardware stay visually aligned once mounted. Its 7-7/8 inch length provides a fixed reference when setting spacing from cabinet edges, which can speed layout when measuring off stiles or drawer sides. The 1-1/4 inch projection provides a repeatable offset from the cabinet face, so shadow lines and hand clearance remain uniform across the installation. The 1/4 inch width gives a consistent narrow line for alignment against layout marks, which reduces the chance of pulls twisting visually out of square. The dull chrome finish delivers the same subdued sheen unit to unit, supporting a uniform look across large cabinet banks.

Common Questions About The 128mm I-Spazio Pull

Selecting This I-Spazio Pull For Your Cabinets

This Berenson I-Spazio Series pull with 5-1/16 inch (128 mm) center to center sizing, 7-7/8 inch length, and 1-1/4 inch projection gives a defined set of dimensions that align with many cabinet layouts. Its zinc die cast construction and dull chrome finish provide a consistent, modern appearance across multiple fronts. When those measurements and visual details match your planned drilling and design direction, this pull offers a straightforward way to keep hardware style and spacing unified from cabinet to cabinet.