S5 DOWEL STEEL W/O CIRCLIP 34X8X0MM, 005757.883.001
Description
Dowel Double End 68 X 7MM Zinc For Cam2000
DOWEL DOUBLE END 68 X 7MM ZINC describes a metal dowel designed for RTA and system fittings, so it supports cabinet and furniture assemblies that rely on cam connectors in production or jobsite builds. Being suitable for use with all 1/2 and 9/16 Cam2000 products means the dowel interfaces correctly with those Titus Tool cam fittings, helping installers keep a single part for multiple panel thickness setups. The double end layout works with opposing cams in typical knock-down constructions, which streamlines carcass alignment during assembly. The metal/zinc material and finish provide a solid mating surface for the Cam2000 mechanism, which helps cams bite consistently in repetitive runs. As a Titus Tool fastener within the RTA fittings class, this dowel matches their Cam2000 system geometry, so it fits established drilling patterns in that platform.
Key RTA Dowel Details For Daily Work
- Suitability for all 1/2 and 9/16 Cam2000 products means one dowel size covers both common panel thickness ranges in that cam family, reducing part variation on cabinet or furniture jobs.
- The double end configuration works with Cam2000 connectors on both sides of a joint, supporting typical RTA cabinet constructions where cams pull panels tight from each end.
- The metal/zinc material and finish give the cam lobes a consistent, hard bearing surface, which supports dependable locking action as panels are tensioned together.
- Classification under RTA and System Fittings identifies this dowel as part of a coordinated assembly system, helping planners match it to compatible Cam2000-based designs.
- Branding as Titus Tool ties the dowel directly to the Cam2000 product line, so component geometry is aligned with that manufacturer-specific cam interface.
Mounting Fit For 1/2 And 9/16 Cam2000
Being suitable for use with all 1/2 and 9/16 Cam2000 products means this Titus Tool dowel is sized to operate within those cam housings for both stated panel thickness ranges, so casework using those dimensions can rely on one dowel format. The DOWEL DOUBLE END 68 X 7MM ZINC description highlights a 7 mm dowel diameter, which matches the drilled hole size specified for this component in the Cam2000 system and supports a snug mechanical fit. The double end design lets each dowel serve two opposing cams in a joint, which simplifies layout where panels meet at corners or intermediate divisions. Placement within the Fasteners and RTA Fittings categories signals that this part is intended for systemized assembly rather than ad hoc fastening, supporting repeatable results in structured drilling patterns.
Using This Titus Tool RTA Dowel In Assemblies
Where This Titus Tool RTA Dowel Fits Best
Designation as DOWEL DOUBLE END 68 X 7MM ZINC positions this part for RTA projects that combine dowels and Cam2000 cams in cabinet or furniture carcasses, because the dowel length and diameter are matched to that system. Its suitability for use with all 1/2 and 9/16 Cam2000 products aligns it with panel constructions that fall into those thickness ranges, so assemblies built around those dimensions can standardize on this dowel. Fasteners and RTA Fittings categorization points toward ready-to-assemble and system-based casework, where consistent hole patterns and matching hardware keep setup predictable. As a Titus Tool component tied to the Cam2000 name, the dowel fits workflows already using that cam platform in production lines, shop builds, or on-site cabinet installations.
How Design Details Support Consistent Cam2000 Results
The absence of a circlip, stated as no circlip for increased tolerance, means the dowel allows more clearance in its hole relative to designs that rely on a circlip, so there is more play to absorb drilling or panel variation. That increased tolerance helps the dowel seat even when hole positions or panel edges vary slightly, which can reduce binding during Cam2000 engagement. The metal/zinc material and finish give cams a stable, repeatable bearing surface along the 68 mm length, which supports uniform torque transfer as the Cam2000 units rotate and pull panels tight. Being configured as a double end dowel ensures both cam locations on either side of a joint engage along the same axis, which aids in drawing parts into alignment when tightening the connectors. The positioning of this part within RTA and System Fittings means its dimensions and functional clearances are tuned to work as a matched element of the Cam2000 fastening system rather than as a generic pin.
Common Questions About This Cam2000 Dowel
What Cam2000 panel thicknesses does this dowel serve?
The DOWEL DOUBLE END 68 X 7MM ZINC is suitable for use with all 1/2 and 9/16 Cam2000 products, so it supports both of those panel thickness categories in that system.
How does the 7 mm diameter affect drilling patterns?
The DOWEL DOUBLE END 68 X 7MM ZINC uses a 7 mm diameter, so drilling patterns for this Titus Tool dowel must match that size to maintain proper fit with Cam2000 components.
Why is this described as a double end dowel?
The DOWEL DOUBLE END 68 X 7MM ZINC has a double end layout so it can engage Cam2000 connectors from both sides of a joint, helping join opposing panels within an RTA assembly.
What is the role of the metal zinc finish here?
The metal/zinc material and finish give the Cam2000 mechanisms a consistent bearing surface, which supports reliable locking when the cams rotate against the dowel under load.
How does no circlip for increased tolerance help?
The no circlip for increased tolerance design provides extra clearance in the dowel fit, so the part can accommodate small variations in drilling or panel alignment around the Cam2000 joint.
What type of projects match this Titus Tool dowel?
This Titus Tool RTA dowel is categorized under Fasteners and RTA Fittings and suits assemblies that use Cam2000 connectors with 1/2 or 9/16 panels in cabinet or furniture work.
Selecting This Dowel For Cam2000 Projects
Choosing the DOWEL DOUBLE END 68 X 7MM ZINC for work that specifies 1/2 or 9/16 Cam2000 products aligns the dowel with the cam system already in your layouts. The metal/zinc construction, double end configuration, and no circlip for increased tolerance design combine to support Cam2000-based RTA assemblies where matched components keep joinery predictable. For projects built around Titus Tool Cam2000 hardware, this RTA and system fitting keeps the dowel component aligned with that platform.