
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
workstation bracket 8x12 primed describes a rigid, heavy duty cantilever support bracket from A and M Hardware, Inc. that is rated at 1,000 lb per pair, so it is built to carry substantial workbench, workstation, or countertop loads in demanding shop and commercial setups. The 8x12 size places the support arm and wall leg in a practical proportion for typical countertop depths, helping installers support surfaces used in workbenches, workstations, garage storage, ADA stations, and computer stations. The bracket is primed, which prepares the steel for finish coating on site, saving prep time where a painted finish is required. As a workstation and countertop bracket, it functions as the primary structural support under tops, so it becomes a key element in keeping surfaces stable during day-to-day use.
This rigid, heavy duty workstation and countertop bracket uses a cantilever layout with multiple 1/4 inch mounting holes per side, giving installers several fixed hole locations for anchoring to suitable structure. This hole pattern helps align with wall cleats or framing while still maintaining the load rating at 1,000 lb per pair when properly supported by the structure. The 3 inch x 3 inch - 45 degree notch on the six larger sizes opens up a diagonal space near the corner of the bracket, creating room for a wall cleat and wire run behind the bracket line. That notch shape matters in projects with continuous cleats or electrical and data lines, because it allows these elements to pass behind the bracket geometry and keeps the bracket bearing on the wall without interference.
These cantilever support brackets are specified for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so they cover a wide range of typical shop, office, and residential utility layouts. Using one bracket style for workbenches and garage storage lets installers maintain a consistent look and structural approach between different areas. In ADA stations, the cantilever design supports tops while keeping the area below open, which supports clear knee and toe space under the counter. For computer stations, the rigid, heavy duty bracket design stabilizes tops that may carry monitors and peripherals, which helps keep equipment steady during regular use. In garage storage applications, the 1,000 lb per pair load rating supports deep shelves or countertops that may carry tools or bins, helping maintain alignment over time.
The reversible design makes brackets versatile and easy to use, because each piece can be oriented to suit the wall layout or service access, reducing field adjustments around obstacles. Multiple 1/4 inch mounting holes per side give several anchoring options, which helps align the bracket pattern with existing studs, blocking, or wall cleats while still presenting a clean, repeated layout. The 3 inch x 3 inch - 45 degree notch on the six larger sizes allows wall cleat and wire run clearance, so cleats, conduit, or cable bundles can pass behind the bracket rather than forcing changes to the bracket spacing. The load rating at 1,000 lb per pair means each set of rights and lefts can carry significant loads, so installers can design stations and countertops with confidence that the bracket is engineered for heavy duty service in workstation and countertop applications.
This product is a rigid, heavy duty cantilever support bracket in the workstation and countertop bracket class, so it is intended to carry structural loads under shelves, countertops, and similar surfaces.
The bracket has a load rating at 1,000 lb per pair, allowing it to support heavy workbench tops, countertops, or storage shelves when mounted to suitable structural backing.
The brackets are for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so they suit both commercial and residential utility installations.
The multiple 1/4 inch mounting holes per side offer several fastening locations, helping align brackets with framing or wall cleats while keeping the installation pattern consistent.
On the six larger sizes, the 3 inch x 3 inch - 45 degree notch creates clearance for a wall cleat and wire run, allowing structural and cabling elements to pass behind the bracket.
The brackets are packaged in equal quantities of rights and lefts, providing matched orientations so each workstation or countertop section can be supported symmetrically along its length.
This A and M Hardware, Inc. workstation and countertop bracket combines a 1,000 lb per pair load rating with a cantilever design, multiple 1/4 inch mounting holes, and a primed finish, so it suits serious workbenches, stations, and garage or computer installations. When a project calls for rigid support under countertops, shelves, ADA stations, or work surfaces, this 8x12 primed model provides the structural bracket design and application range described here, ready to integrate into your next workstation or storage layout.
Sold In: 1 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3 Pair | AH2424PRIMED-B Mfr# BULK - 24X24 PRIMED (6 EA PER BOX) | Shelf & Countertop Supports Rigid, Heavy Duty - A And M Hardware, Inc. BULK - 24X24 PRIMED (6 EA PER BOX) |