Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drip tray helps protect a sink cabinet from minor leaks in kitchens, baths, and other cabinet spaces with plumbing. This Rev-A-Shelf under sink organizer is part of the SBDT Series and is made as a silver drip tray sized at 34-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high. It holds up to 1.75 quarts of water, giving installers and cabinet shops a simple way to add cabinet leak protection during new construction or cabinet assembly. Compared with basic mats or improvised basins, this purpose-built sink cabinet drip tray is designed for the under-sink area. Rev-A-Shelf notes that installation is recommended for new cabinetry, and the product may be difficult to install after the sink and countertop are already in place.
Key specs to confirm: This sink cabinet drip tray is listed at 34-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high, with a stated capacity of 1.75 quarts. Buyers should confirm the clear interior cabinet floor area, plumbing locations, and any obstructions that could affect placement. Because Rev-A-Shelf recommends this product for new cabinetry, it is important to verify whether the tray can be installed before the sink and countertop go in. If you are reviewing undersink pull-out systems, mats, or basins together, confirm that this tray fits your cabinet plan and does not interfere with other accessories. Safety, compliance, and any unlisted material details should be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies the Rev-A-Shelf SBDT Series silver drip tray. Mounting hardware and other included items are not specified and should be confirmed before ordering.
What to verify before ordering: Check cabinet interior width and depth, sink base layout, drain and supply line positions, and whether the tray will be installed in new cabinetry or retrofitted into an existing cabinet after the sink and countertop are installed.
A sink cabinet drip tray is most useful when it is planned before the cabinet is fully built out. For cabinet shops, remodelers, and installers, that means reviewing the cabinet floor dimensions and plumbing layout during the design or rough-fit stage. This Rev-A-Shelf drip tray is intended to protect a sink cabinet from minor leaks, which makes it a practical add-on where supply lines, drain fittings, disposers, or filtration parts may eventually create moisture under the sink.
In a kitchen sink base, a buyer may want an under sink organizer that does more than act like a flat liner. The shallow tray format helps contain a limited amount of water rather than letting it spread directly onto the cabinet bottom. In a bath vanity, the same idea applies when the goal is to reduce exposure from small drips around plumbing connections. The listed 1.75 quart capacity gives buyers a clear reference point for minor leak containment, but it should not be treated as a substitute for repairing the plumbing issue.
This silver drip tray can also make routine inspection easier. A purpose-built tray gives the installer or homeowner a defined area to check for moisture, residue, or signs of a developing leak. Buyers comparing mats and basins often want to know whether the product is made for under-sink use rather than general cabinet lining. Here, the product data clearly identifies the tray as designed to protect a sink cabinet from minor leaks.
The key installation point is timing. Rev-A-Shelf states that the product is recommended for new cabinetry and may be difficult to install after the sink and countertop are installed. That matters for anyone ordering late in a project. If the cabinet is already in service, confirm access, plumbing clearance, and whether the tray can still be positioned without removing surrounding components.
When buyers compare a sink cabinet drip tray, the first practical difference is whether the product is built around verified dimensions and a stated use case. This Rev-A-Shelf under sink organizer provides exact size information and a defined purpose: protecting a sink cabinet from minor leaks. That helps reduce guesswork during cabinet planning.
Another useful comparison point is install timing. Some under-sink accessories are easy to add later, while others are much easier to place during cabinet assembly. Rev-A-Shelf specifically notes that this tray is recommended for new cabinetry. For trade buyers, that guidance helps with scheduling and avoids assumptions about retrofit access.
Capacity is another factor. The listed 1.75 quart volume gives a concrete measure for minor water retention. Buyers should still confirm whether that level of containment fits their application and understand that a drip tray is meant to help manage small leaks, not major plumbing failures.
Finish and application also matter. This is a silver drip tray in the SBDT Series, intended for sink cabinet use. Buyers who are comparing under sink organizer products, mats, or basins should focus on cabinet interior dimensions, plumbing interference, and whether any other accessories will share the same floor area. A product with clear dimensions, a stated use, and brand-backed identification is easier to specify correctly than a generic liner with unclear fit.
Rev-A-Shelf drip tray is designed to protect a sink cabinet from minor leaks.
This sink cabinet drip tray is listed at 34-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high.
This silver drip tray holds up to 1.75 quarts of water.
This under sink organizer is recommended for new cabinetry. Rev-A-Shelf notes it may be difficult to install after the sink and countertop are installed.
This drip tray fits only where the cabinet interior and plumbing layout allow its 34-1/2 inch by 23-1/4 inch footprint.
This tray may work with other under-sink accessories if cabinet floor space and plumbing clearances are confirmed before ordering.
This Rev-A-Shelf SBDT Series drip tray is silver.
This sink cabinet drip tray should be checked against cabinet interior size, plumbing locations, and install timing before purchase.
Included hardware is not specified in the verified data, so included items should be confirmed before ordering.
This product's compliance details are not listed in the verified data. Follow manufacturer installation guidance and local building requirements where applicable.
Under sink organizer selection is easier when the size, use case, and install timing are clear. This Rev-A-Shelf drip tray is a silver SBDT Series tray made to help protect a sink cabinet from minor leaks, with verified dimensions of 34-1/2 inches by 23-1/4 inches by 3/4 inch and a 1.75 quart capacity. Before purchase, confirm cabinet interior clearance, plumbing layout, and whether installation will happen in new cabinetry. Also confirm any included hardware or accessory details that are not listed in the verified product data.
Sold In: 1 Each
