Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drip tray helps protect a sink cabinet from minor leaks in kitchen or bath cabinetry. This under sink organizer from Rev-A-Shelf Corporation is part of the Rev-A-Shelf SBDT Series and is designed as a silver drip tray for cabinet leak protection. The tray measures 28-1/2 inches wide by 23-1/4 inches long by 3/4 inch high and holds up to 1.75 quarts of water. Buyers looking at mats, basins, or an under sink cabinet tray often want a simple way to contain small drips before they spread across the cabinet floor. Product data also notes that this sink cabinet drip tray is recommended for new cabinetry and may be difficult to install after the sink and countertop are already installed.
Key specs to confirm: This sink cabinet drip tray is listed at 28-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high, with a 1.75 quart water capacity. Those are the main measurements to compare against the clear floor area inside your sink base cabinet. Because this product is recommended for new cabinetry, buyers should confirm whether the tray can be placed before plumbing, sink, and countertop installation. If your project needs any safety, compliance, load, or other technical documentation, those details are not provided here and should be confirmed with the manufacturer or technical documentation before purchase.
What's included: Verified data identifies the product as a Rev-A-Shelf SBDT Series silver drip tray. Other included items are not specified and should be confirmed before ordering.
What to verify before ordering: Confirm your cabinet's inside floor dimensions, plumbing locations, and access for installation. Check that a 28-1/2 inch by 23-1/4 inch tray fits around existing obstructions. If the sink and countertop are already installed, verify that you still have enough room to place the tray properly. Follow manufacturer installation guidance and local building requirements where applicable.
A silver drip tray like this one is typically chosen by cabinet shops, remodelers, and homeowners who want basic cabinet leak protection under a sink. In many sink-base cabinets, even a small drip from a supply line, drain connection, or disposal area can sit unnoticed on the cabinet floor. Over time, that moisture can affect the cabinet interior. A Rev-A-Shelf drip tray gives that water a defined place to collect so the source can be noticed sooner.
This under sink organizer is especially relevant in new construction or cabinet replacement projects. The verified product guidance says it is recommended for new cabinetry. That matters because access is usually easiest before the sink and countertop are installed. If you are planning a new kitchen or bath cabinet run, the tray can be part of the cabinet protection plan from the start. If you are retrofitting an existing sink base, the product data warns that installation may be difficult after the sink and countertop are in place. That does not mean it cannot work in every retrofit, but it does mean the buyer should measure carefully and confirm access before ordering.
Buyers comparing mats, basins, and an under sink cabinet tray often want to know what practical difference this product makes. The key verified advantage here is contained minor leak management. This Rev-A-Shelf SBDT Series tray holds 1.75 quarts of water and is sized at 28-1/2 inches wide by 23-1/4 inches long by 3/4 inch high. Those dimensions help determine whether it will cover enough cabinet floor area for your application. In a standard sink-base project, that can help create a cleaner, more controlled area below plumbing connections, but the exact fit still depends on your cabinet interior and any obstructions.
For professionals, the main pain point is avoiding a mismatch between tray size and cabinet floor space. For serious DIY buyers, the main pain point is access. In both cases, the purchase decision should focus on interior cabinet measurements, plumbing layout, and installation timing. If your project needs exact material details, mounting details, or accessory information, those items are not listed in the verified product data and should be confirmed before finalizing the order.
When buyers compare a sink cabinet drip tray, the most useful factors are usually size, water containment, finish, and installation timing. This Rev-A-Shelf drip tray gives clear verified measurements and a stated 1.75 quart capacity, which helps make planning more straightforward. Instead of relying on rough estimates, you can compare the listed width, length, and height directly to your cabinet base area.
Another point to compare is finish availability within the product family. The verified description states that this tray is available in two colors, Almond and Silver. For buyers who want the tray to coordinate with the cabinet interior or remain easy to inspect visually, that can be a practical consideration. This specific product is the silver drip tray version.
Installation stage also matters when comparing under sink organizer products. Some products are easiest to add during a cabinet build or full remodel, while others may be considered later in the project. The verified note for this item says it is recommended for new cabinetry and may be difficult to install after the sink and countertop are installed. That gives buyers a clear planning point before they commit.
Brand consistency can also matter for trade buyers ordering from an established manufacturer. Rev-A-Shelf Corporation clearly identifies this item within the SBDT Series and the under sink organizer class. That helps when matching products across projects, reordering for similar cabinet sizes, or confirming that the tray fits the intended use as a protective basin-style cabinet insert. As with any sink cabinet drip tray, final suitability depends on your exact cabinet interior, plumbing path, and installation access.
This sink cabinet drip tray fits only where the cabinet floor area can accept its 28-1/2 inch by 23-1/4 inch size and 3/4 inch height.
This Rev-A-Shelf drip tray is recommended for new cabinetry, and product data says installation may be difficult after the sink and countertop are installed.
This Rev-A-Shelf SBDT Series tray holds 1.75 quarts of water for minor leak containment.
This silver drip tray measures 28-1/2 inches wide, 23-1/4 inches long, and 3/4 inch high.
This under sink organizer may be difficult to install after the sink and countertop are installed, so access should be checked before ordering.
This sink cabinet drip tray is designed to protect a sink cabinet from minor leaks, not to replace plumbing repair or full flood protection measures.
This product is the silver drip tray version in the Rev-A-Shelf SBDT Series.
The Rev-A-Shelf SBDT Series is available in Almond and Silver according to the verified product description.
This under sink cabinet tray requires confirmation of interior cabinet dimensions, plumbing obstructions, and installation access before purchase.
This product listing verifies the tray itself, but other included components are not specified and should be confirmed before ordering.
Under sink organizer planning is easiest when you confirm cabinet fit before the sink area is fully built out. This Rev-A-Shelf drip tray gives a verified silver finish, 28-1/2 inch by 23-1/4 inch size, 3/4 inch height, and 1.75 quart capacity for minor leaks. Before purchase, confirm interior cabinet dimensions, plumbing clearance, and whether the tray can be installed at your stage of the project. Included components beyond the tray are not specified, so that detail should also be checked before ordering.
Sold In: 1 Each
