Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Steel Series 96mm pull is a steel cabinet handle in the Pro Value Series that provides a simple bar-style grip for doors and drawers. The material is steel, so the pull offers a solid feel when opening and closing cabinets in busy shops or residential spaces. The finish is stainless steel, which presents a neutral look that works with many door and drawer fronts where a straightforward metal pull is preferred. The center to center dimension is 3-3/4 inches, so the handle lines up with 96 mm drilling patterns commonly used on cabinet fronts for consistent layouts. The overall length is 5-5/16 inches, giving enough bar length for a comfortable hand grip across typical cabinet widths. The projection is 1-1/4 inches, which spaces the bar away from the door face so fingers clear the surface while operating the door or drawer.
The center to center measurement of 96 mm, listed as 3-3/4 inches, sets the drilling pattern for this pull so installers can bore two holes at that spacing and expect the handle to align. The screw size is 8-32 x 1 inch, which defines the thread and length that match the pull's mounting holes for fastening to the cabinet front. The 1-1/4 inch projection positions the bar away from the face, which helps prevent knuckles from rubbing the door or drawer front during use. The width of 7/16 inch determines how much bar edge is available for gripping, supporting a secure hold without excessive bulk. The 5-5/16 inch length keeps each end of the bar extending beyond the mounting points, which assists with even pulling force across the hardware when doors or drawers are opened.
The Pro Value Steel Series 3-3/4 inch center to center stainless steel pull is suited to cabinet doors and drawers that are drilled for a 96 mm spread, because the mounting holes match that measurement. The bar style makes the pull appropriate for residential or shop cabinetry where a straight, linear handle is preferred across banks of drawers or doors. The stainless steel finish aligns with applications using other stainless elements, such as appliances or metal fixtures, so the hardware ties into broader project themes. The 5-5/16 inch length allows the pull to sit proportionally on typical cabinet fronts that use 96 mm spacing, helping layouts look balanced on both narrow and mid-sized fronts.
The steel construction of this pull helps maintain shape under everyday pulling forces, which supports consistent feel across multiple cabinets using the same part number STBAR96-SS. The defined 96 mm center to center dimension allows installers to repeat the same boring pattern throughout a project, saving layout time once the first set of holes is established. The 1-1/4 inch projection creates space between hand and door face, which helps reduce contact with finished surfaces during use. The 7/16 inch width establishes a slim line that still presents a clear gripping edge, keeping the installation visually light while preserving usability. The specified screw size of 8-32 x 1 inch indicates the thread required at each mounting point, so fasteners engage correctly with the pull body for firm attachment to the cabinet front.
The Pro Value Steel Series STBAR96-SS pull uses a 3-3/4 inch, or 96 mm, center to center drilling pattern, so hole spacing follows that measurement on cabinet doors and drawers.
The Pro Value Steel Series bar pull is 5-5/16 inches long, giving extra bar length beyond the mounting holes for a comfortable hand grip on cabinet fronts.
The 96mm bar pull uses steel material with a stainless steel finish, providing a solid metal feel and a neutral appearance that coordinates with many cabinet styles.
The stainless steel cabinet pull has a 1-1/4 inch projection, spacing the bar away from the door face so fingers fit behind the pull during operation.
The Pro Value Series 96mm center to center pull is 7/16 inch wide, giving a slim profile while still providing enough edge thickness for a secure grip.
The STBAR96-SS pull uses 8-32 x 1 inch screws, so mounting relies on that thread and length to fasten the handle to the cabinet front securely.
The Pro Value Steel Series 3-3/4 inch center to center stainless steel pull offers a defined 96 mm drilling pattern, clear 5-5/16 inch length, and 1-1/4 inch projection that support repeatable cabinet work. The steel construction and stainless steel finish give a straightforward metal bar suited to projects that use a consistent handle style across doors and drawers. For cabinet runs where a 96 mm layout is planned, this STBAR96-SS pull provides the dimensions and thread details needed to plan drilling, fastening, and visual alignment around a single part number.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SZBAR96-SN Mfr# SZBAR96-SN | Pro Value Steel Series 3-3/4" (96 mm) Center to Center Satin Nickel Pull, - SZBAR96-SN |