Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This VMI decorative wood range hood shell brings a mantel-style presence to the wall above the cooktop, built in red oak and ready for a custom finish to match the surrounding cabinetry. The liner and ventilation unit are selected separately so the install can be sized and configured to the specific kitchen.
The defining feature of this shell is the detachable front panel. On a standard hood shell, the face and body come as one piece, which can make fitting the unit into a tight wall run or routing wiring and ductwork awkward. Here the front panel separates, so the body can be set in position first, the liner and ventilator seated, and the face panel attached once the mechanical work is done. For a kitchen where the hood sits between tall upper cabinets or a tight soffit, that sequence removes a common installation headache. Installers working in production cabinet shops or on multi-unit projects will find the detachable front cuts time on the back-and-forth fitting that a one-piece shell requires.
Red oak brings a pronounced, open grain that reads well with both stain and paint. The shell ships unfinished so the finish can be applied on-site to match the door style, stain color, or paint specification of the surrounding cabinetry. That makes this shell a practical choice for custom and semi-custom kitchens where the hood needs to disappear into the wall of cabinetry rather than stand out as a separate appliance. At 36 inches wide with a 42-inch height and 25-inch depth, the proportions support the mantel scale that larger kitchens and pro-style ranges call for.
Cabinet designers, finish carpenters, and kitchen installers working on higher-end residential projects reach for this shell when the design calls for a mantel-scale hood that matches the cabinetry finish exactly. Because the liner and ventilator are not included, the mechanical side of the install is sized independently: choose a liner compatible with the hood body dimensions, then pair it with a ventilator rated for the cooktop's BTU output and the kitchen's ductwork. This separation gives the installer or designer full control over the airflow specification without being locked into a bundled ventilator that may not suit the range or the duct run.
Neither is included. This is the decorative red oak wood shell only. The liner and ventilation unit are ordered separately, which allows the mechanical components to be matched to the cooktop output and ductwork configuration.
The face panel separates from the hood body so the shell can be positioned and the liner and ventilator installed before the front is attached. That sequence is useful when the hood sits in a tight run between upper cabinets or when ductwork needs to be routed before the face is in place.
Yes. It ships ready-to-finish and accepts paint or stain. Red oak has an open grain, so a paint-grade application typically calls for a grain filler or primer designed for open-grain wood to achieve a smooth surface.
The shell is 36 inches wide, 42 inches tall, and 25 inches deep. Confirm that the liner selected fits within the interior dimensions of the shell before ordering.
Choose this red oak detachable-front shell when the design calls for a custom-finished mantel hood, sized at 36 inches wide, that the installer can fit efficiently and the finisher can match precisely to the rest of the kitchen.