Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This VMI Detachable Front mantel range hood is a 60-inch decorative wood shell in red oak, designed for wall-mount installation above a cooktop where the hood needs to span a wider cooking surface or tie into flanking cabinetry at a full mantel scale.
A wide kitchen run, a 48-inch or 60-inch range, or a layout where the hood anchors a full wall of cabinetry all benefit from a shell at this scale. At 60 inches across and 42 inches tall, the mantel profile reads as architectural rather than appliance, connecting visually to the upper cabinet run on either side. The detachable front is practical at this size: the face comes away cleanly so the installer can fit the shell, run the liner, and reattach the front without maneuvering a fully assembled 60-inch unit into position. Because the shell ships unfinished, the finish can be matched to the cabinet doors and trim already in the space rather than working around a factory color.
Red oak's open grain and warm undertone become a design element at 60 inches wide, where the figure of the wood is visible across a broad face rather than tucked into a narrower shell. It accepts both oil-based and water-based stains and finishes, which matters on a job where the adjacent cabinets may already have a committed finish system. Because the shell is supplied unfinished, the finishing can happen on-site after installation for a seamless color match, or in the shop before the hood goes up if the surrounding cabinets are a known species and stain combination.
This shell is the decorative enclosure. It does not include a blower, ventilation insert, or liner. The liner and ventilator are chosen separately to match the cooktop's output and the duct configuration of the kitchen. That separation is intentional: a 60-inch shell may serve a 48-inch range with flanking trim or a true 60-inch cooktop, and the ventilation unit is sized to the cooking surface, not to the hood width. Cabinet shops and designers specifying this shell should confirm the liner dimensions and ventilator compatibility before the installation date, since the liner seats the ventilator and both need to land before the front panel is reattached.
No. This is the decorative red oak shell only. The liner and ventilation unit are selected and ordered separately to match the cooktop and duct setup.
The decorative face panel separates from the hood body, so the main structure can be set and the liner fitted before the front is reattached. At 60 inches wide, that makes positioning and liner installation significantly more manageable.
Yes. The shell is unfinished red oak and accepts both paint and stain. For a painted finish, priming the grain and using a paint-grade prep approach will produce a smoother result given red oak's open grain structure.
Wall mount. It is designed to install against the wall above a cooktop or range, not as a freestanding island hood.
At 60 inches wide in unfinished red oak, this VMI Detachable Front mantel shell gives a wide kitchen run the architectural anchor it needs, ready to finish on-site and pair with the liner and ventilation unit that suits the cooktop.