Knape And Vogt 22 Inch Soft Close Drawer Slides

Knape and Vogt 22 inch soft close drawer slides give you full extension access to the drawer, so the 8450FMB EB 22 slide brings the box completely out for clear reach to the back. The full extension 100-pound rated integrated soft-close design supports heavier drawer loads while controlling closing speed, which helps drawers shut in a controlled way under normal shop or cabinet use. The side mount ball bearing construction uses three ball bearings per inch, so the drawer movement stays smooth along the entire travel. Integrated soft-close with Force Management technology slows the closing stroke, which matters when you want drawers to close quietly in finished cabinetry. The 22 inch length suits typical base and utility cabinet drawers where that depth is specified. The black finish aligns with darker cabinet interiors, which can help the hardware blend visually in many shop-built projects.

Key Functional Details For Drawer Builders

• The 8450FMB EB 22 slide is a side mount ball bearing style, which sets up a familiar installation layout for casework built for side-mounted runners while providing consistent travel along the cabinet side.
• The non-handed design allows either left or right installation from the same piece, which simplifies layout and reduces part sorting on the bench during runs of multiple cabinets.
• Side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the required drawer box width, which helps dial in sizing so the drawer tracks smoothly without excessive play.
• The height of 1-13/16 inch sets the vertical space the slide occupies, guiding notch depths and clearance around drawer bottoms and web frames during construction.
• The 32 mm pattern is present, giving a familiar hole spacing that lines up with system boring, which supports faster, repeatable mounting in production or jig-based setups.
• The push-in lever allows for easy drawer removal, which speeds up finishing, adjustments, or service work when drawers need to be taken out and reinstalled.

Mounting, Clearance, And Installation Fit Details

This side mount drawer slide uses a 1/2 inch side clearance plus 1/32 inch minus 0 inch per side, so drawers must be sized to that allowance for the ball bearings to engage properly. The 1-13/16 inch slide height sets how much vertical room the slide occupies on the drawer side, which matters when positioning it between the bottom panel and any intermediate rails. The 22 inch length ties directly to cabinet depth planning, so cases need to be deep enough to accept the full slide body. Recommended fasteners are #7 x 5/8 inch Phillips pan head screws, which define shank diameter and length suited to the slide holes and typical cabinet side thickness.

Using KV 8450 Series Slides In Cabinet Work

Where These 8450FMB EB 22 Slides Fit Best

The KV 8450 series 22 inch slide is positioned for drawers where full extension and a 100-pound rating are required, so it suits applications with moderate to heavier stored items in kitchens, shops, or utility cabinets. The side mount configuration matches carcasses built for traditional side-mounted runners, which keeps layout consistent across a project. The black finish pairs well with dark interiors, so the hardware is less visible when drawers are open in contemporary designs. The 32 mm pattern aligns with system-bored cabinets, which is useful in commercial or modular work where panel drilling follows that standard. Non-handed construction means each slide can serve either side of the drawer, reducing specific left-right inventory during installation.

Why These Slide Details Support Consistent Results

The full extension travel allows the drawer box to project its full 22 inch slide length, which lets end users access the rear of the drawer without reaching over front items. The integrated soft-close with Force Management technology slows and pulls the drawer closed, which reduces slamming and helps keep contents from shifting under normal use. Three ball bearings per inch support the moving member continuously, which maintains smooth motion even when the load approaches the 100-pound rating. Polymer stop cushions are built in to soften the stop point, which reduces noise and impact on both the drawer and the cabinet. The ball retainer latch and ramps allow for easy drawer insertion, which helps the installer engage the slide members quickly when setting drawers into the cabinet. A push-in lever provides a straightforward release, which is practical when drawers need to be removed for adjustments, finishing work, or access to the cabinet interior.

Common Questions About 8450FMB EB 22 Slides

Selecting These Slides For Your Next Drawer Run

The Knape and Vogt 22 inch soft close drawer slides combine full extension, a 100-pound rating, and side mount ball bearing construction, which supports demanding cabinet drawers. The defined 1/2 inch plus 1/32 inch minus 0 inch side clearance and 1-13/16 inch height give clear sizing targets during drawer construction. Integrated soft-close with Force Management technology and three ball bearings per inch support smooth, quiet operation in everyday use. For projects built around KV 8450 series geometry, the 8450FMB EB 22 model offers a clear, spec-defined option for 22 inch deep drawers.